Flow field optimization and inclusion behavior in a 70-ton T-type eight-strand continuous casting tundish
Abstract
As a critical unit in metallurgical processing, the tundish plays a vital role in ensuring smooth continuous casting operation, facilitating the flotation and removal of non-metallic inclusions, and enhancing the cleanliness and homogeneity of molten steel. This study addresses the key issues of flow-field non-uniformity, significant inter-strand response time disparity, poor inclusion removal efficiency, and notable temperature gradient in a large-spacing eight-strand continuous casting tundish. A hybrid methodology integrating scaled physical experimentation with high-fidelity numerical simulation was employed to optimize flow dynamics and quantify inclusion transport and removal. Based on the principle of similarity, a 1:3-scale plexiglass physical model was established with U- and V-shaped porous baffles as the core flow control elements, respectively. Multiple combination schemes were designed by varying the diameter, position, inclination angle, and deflection angle of the diversion holes. Residence time distribution curves were experimentally acquired via the stimulus-response method, and quantitative hydraulic metrics, including dead zone volume fraction, plug flow volume fraction, and mixed (dispersive) volume fraction, were rigorously evaluated. Meanwhile, a three-dimensional numerical model was developed using the realizable k-ε turbulence closure and the discrete phase model to resolve the coupled flow, thermal, and particle-tracking phenomena. Flotation behavior of inclusions with sizes ranging from 20 to 100 μm was revealed. Results indicate that the U-shaped baffle configuration consistently outperforms its V-shaped counterpart: the optimal U-shaped scheme achieves a minimum dead zone volume fraction of 18.69% and a maximum mean residence time of 521.56 s. In numerical simulations, the optimized U-shaped baffle scheme CU2 yields a standard deviation of outlet temperature of merely 0.214 K and achieves inclusion removal efficiencies of 46.1% (20 μm) and 62.1% (40 μm), representing substantial improvements over the optimal V-shaped alternative. Furthermore, a newly proposed pentagonal eaved turbulence inhibitor demonstrates well-balanced, comprehensive advantages relative to conventional square and circular designs, exhibiting enhanced thermal field uniformity, stable and consistent inclusion removal across all strand positions, and greater flexibility in retrofit installation within existing tundish geometries. Collectively, these findings provide theoretical guidance for the industrial application of flow control devices in large-spacing eight-strand tundishes.