Pilot-scale production and characterization of liquid fuel from mixed non-recyclable plastics for potential steam-generation applications
Abstract
Post-sorting non-recyclable plastic residues pose significant management challenges due to the limitations of mechanical recycling. This study demonstrates a novel, direct vacuum-assisted pilot-scale batch pyrolysis of mixed plastic rejects dominated by polypropylene (PP, ≥45 wt%), low-density polyethylene (LDPE, ≥45 wt%), polystyrene (PS, ≤5 wt%), and high-density polyethylene (HDPE, ≤5 wt%) in an insulated 1,000 L reactor without continuous inert-gas purging. Under optimized operating conditions (30 min air pre-evacuation at 15–20 kPa, 20 kg feed loading, LPG heat input at ∼25% maximum flow, and 1 h reaction at ∼450 °C), a high condensable liquid yield of ∼80 wt% was achieved. Comprehensive structural and compositional characterization via FTIR confirmed the pyrolytic liquid's aliphatic-rich nature, featuring strong C–H stretching vibrations (2956–2850 cm−1), C–H bending (1455 cm−1 and 1375 cm−1), and unsaturated alkene C <svg xmlns="http://www.w3.org/2000/svg" version="1.0" width="13.200000pt" height="16.000000pt" viewBox="0 0 13.200000 16.000000" preserveAspectRatio="xMidYMid meet"><metadata> Created by potrace 1.16, written by Peter Selinger 2001-2019 </metadata><g transform="translate(1.000000,15.000000) scale(0.017500,-0.017500)" fill="currentColor" stroke="none"><path d="M0 440 l0 -40 320 0 320 0 0 40 0 40 -320 0 -320 0 0 -40z M0 280 l0 -40 320 0 320 0 0 40 0 40 -320 0 -320 0 0 -40z"/></g></svg> C bonds (1640 cm−1 and 990–890 cm−1). GC-MS analysis further revealed a carbon number distribution highly compatible with commercial heavy fuel oil, dominated by heavy (>C13, 63.02% area) and middle-distillate (C10–C13, 23.28% area) fractions, with low total aromaticity (11.57% area in >C13). Fuel-property benchmarking demonstrated a high heating value (43 115–43 500 cal g−1) and kinematic viscosity at 50 °C (∼12 cSt) closely matching commercial furnace oil (43 619 cal g−1 and 12 cSt), alongside environmentally advantageous ultra-low sulfur (0.0038–0.0057 wt%) and ash contents (<0.001 wt%). Washing pretreatment offered no improvement in liquid recovery while significantly increasing water and sediment content (20 vol% vs. 0.9 vol% for unwashed feed) due to trapped residual moisture. Distance-resolved air-quality monitoring confirmed rapid dispersion of particulate matter (PM2.5: 293 → 165 → 22 µg m−3; PM10: 384 → 134 → 28 µg m−3 at 0/5/10 m), establishing a safe operational buffer distance of ≥10 m. Overall, this single-step, direct vacuum-assisted process offers an energy-efficient, low-cost solution for converting municipal plastic waste into high-quality commercial fuel oil substitutes without requiring catalytic upgrading or post-pyrolysis distillation.