Silver telluride (Ag2Te) colloidal quantum dots (CQDs) are promising infrared (IR) absorbers without heavy metals due to their adjustable bandgap, environmental friendliness, and solution processability, yet photodetector performance is frequently hindered by inferior charge transport, interfacial recombination, and surface trap states. In this study, an interfacial engineering strategy utilizing Ti3C2Tx MXene is applied to improve the optoelectronic performance of Ag2Te CQD IR photodetectors. By systematically incorporating Ti3C2Tx MXene into the device structure, its impact on charge extraction, carrier transport, and interface optimization is explored. As a result, a responsivity of 4.622 mA/W with a specific detectivity of 1.907 × 1010 Jones is obtained from the photodetector ITO/SnO2/Ti3C2Tx/Ag2Te/MoO3/Ag under 0.177 mW/cm2 1550 nm illumination, with a rapid rise and decay time of 52.0 and 57.4 ms, respectively. Ultraviolet photoelectron spectroscopy indicates improved energy-level alignment and enhanced carrier extraction at the SnO2/Ag2Te interface following MXene integration. Finite-difference time-domain and OghmaNano simulations further support our experimental results by showing increased optical absorption, stronger electromagnetic field confinement, and greater photocarrier generation in the photodetector. This research underscores MXene-enabled interfacial engineering as an effective method for addressing charge transport challenges and offers a promising route toward high-performance, solution-processed, environmentally friendly IR optoelectronic devices.
Colloidal quantum dot (CQD) infrared (IR) photodetectors exhibit great application potential in the fields of optical communication, environmental monitoring, imaging, and wearable sensing. Specifically, AgBiS2 CQD IR photodetectors have garnered extensive attention because of their excellent photoelectric properties...
Jun-Lin Wang, He Li, Tian-Yu Luo et al.· ACS Applied Electronic Mater...· 0 citations
The InGaN/Cs3Cu2I5 heterojunction shows great potential for UV-visible photodetection due to the superior optoelectronic properties of both materials. However, its performance is limited by poor crystallinity of Cs3Cu2I5 and inefficient interfacial carrier transport. To address these issues, we introduce a graphene (Gr...
Ji-Xing Chai, Yang-Pu Liu, Wen-Liang Wang et al.· Optics Express· 0 citations
Ecofriendly silver telluride (Ag2Te) colloidal quantum dots (QDs) are promising for shortwave infrared (SWIR) photodetectors. However, the performances of the devices–especially beyond 1.5 μm–remain constrained photoelectric conversion efficiency due to inefficient charge extraction. Here, we develop a ternary Ag-T...
In this study, high-performance near-infrared (NIR) phototransistors were developed based on tin dioxide (SnO2) thin films decorated with AgxTe colloidal quantum dots (CQDs). The hybrid SnO2/AgxTe architecture was designed to overcome the intrinsic limitations imposed by the wide bandgap of SnO2, enabling NIR photodete...
Won-Yong Lee, Jongmin Yoon, Taesun Kim et al.· ACS Applied Materials and In...· 0 citations
The realization of efficient 1.54 µm electroluminescence from erbium ions is persistently hampered by their intrinsically small absorption cross-section and low excitation efficiency in conventional hosts. This study addresses this by synthesizing lead-free Cs3CrBr6 perovskite nanocrystals. This material is a direct-ba...
Han Xu, Tian-Yuan Wang, Wen-Rong Xie et al.· Nature Communications· 0 citations
Tin−lead (Sn−Pb) mixed perovskites have emerged as promising candidates for near-infrared photodetection owing to their narrow bandgaps and outstanding optoelectronic properties. However, the facile oxidation of Sn2+ and the high defect density within the perovskite films severely limit the detection sensitivity and...