Skip to content
Open access

Comparison of Zero-Sequence Current Controllers for Open-End-Winding PMSM Drives Fed by a Common DC-Link

Sep 2026 · 2026 IEEE/CCAE Symposium on Advanced Electrification Systems (SAES) · pp. 1-8 · 0 citations · 13 references

Abstract

Dual-inverter open-end winding permanent-magnet synchronous motor (OEW-PMSM) drives supplied by a common dc-link are attractive for high-performance electric traction thanks to their improved dc-link voltage utilization and enhanced fault tolerance. However, the common dc-link creates a conductive path for zero-sequence current (ZSC), whose circulation increases current distortion and degrades the overall drive performance. While closed-loop ZSC mitigation has been widely adopted to actively compensate circulating currents, the influence of the adopted feedback controller on the achievable performance has not been systematically investigated. This paper presents a comparative analysis of three closed-loop ZSC controllers, namely a conventional stationary-frame proportional-integral (PI) controller, an adaptive proportional-resonant (PR) controller, and a PI controller operating in a virtual synchronous reference frame. Their disturbance rejection characteristics are first analyzed in the frequency domain and subsequently assessed through detailed numerical simulations under representative operating conditions. Time-domain current waveforms and harmonic spectra are compared over a wide speed range to evaluate the effectiveness of each controller in suppressing the dominant third-harmonic ZSC component. The obtained results highlight the trade-off between harmonic attenuation and implementation complexity, providing practical guidelines for selecting the most suitable controller for common dc-link OEW-PMSM drives.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.