High-Speed CMOS Optical Receivers: Design Aspects and Techniques [Feature]
Abstract
CMOS high-speed optical receivers (ORXs) feature low power, low cost, and high integration density. However, the design of ORXs in scaled CMOS technology is challenging due to the reduced intrinsic gain and voltage supply. This paper starts by briefly describing conventional full-bandwidth (FBW) receivers that cascade broadband transimpedance and main amplifiers to highlight design trade-offs that limit their performance. Several techniques such as equalization, differential current sensing, and multi-stage shunt-feedback (MS-SF) transimpedance amplifiers (TIA) can be used to improve the performance over the FBW receiver. These techniques are analytically compared at the system level to indicate their relative merits and/or main limitations. Four scenarios arising from combinations of two signaling formats (two-level and four-level pulse amplitude modulation) and two packaging technologies (wire bonding and flip-chip bonding) are considered for this comparison. The comparison aims to provide recommendations on which design technique is more suitable to use for a given signaling format and packaging technology. A wide survey of recently published optical receivers based on full-bandwidth, equalizers, differential current sensing, and MS-SF-TIA approaches is presented. State-of-the-art examples are discussed and compared. The comparison confirms the findings obtained from the presented analytical modeling.