Skip to content
Conference Open access

Lattice Boltzmann investigation of humidity-dependent structural design for balanced oxygen and proton transport in low-Pt PEMFC cathode catalyst layers

Sep 2026 · Journal of Physics, Conference Series · Vol 3323 · 0 citations · 45 references
Physics

Abstract

Next-generation proton exchange membrane fuel cells (PEMFCs) require low Pt loading and enhanced adaptability to low-humidity operation. However, oxygen and proton transport in low-Pt cathode catalyst layers (CCLs) impose conflicting demands on pore accessibility, Pt dispersion and ionomer connectivity, especially at low humidity. In this work, a pore-scale oxygen and proton transport-reaction model based on the multiple-relaxation-time (MRT) lattice Boltzmann method (LBM) was developed to resolve oxygen diffusion in pores and ionomer films, proton conduction in connected ionomer networks, and oxygen reduction reaction (ORR) in reconstructed CCLs. The model and the reconstructed microstructures were initially evaluated using the effective oxygen diffusivity, effective proton conductivity and polarization curves. Subsequently, fixed-current simulations were performed at 80 °C and 1.5 atm under 100% and 40% RH with a Pt loading of 0.05 mg cm−2 and a current density of 1.0 A cm−2 to investigate the humidity-dependent influences of Pt mass fraction (ωPt) and ionomer-to-carbon ratio (θI). The results indicate that increasing ωPt produces thinner CCLs and lowers the CCL ohmic loss, but intensifies local oxygen transport limitation and increases the concentration loss. The minimum combined CCL loss, defined as the sum of the concentration loss and CCL ohmic loss, shifts from ωPt = 30.0% at 100% RH to ωPt = 35.0% at 40% RH. Increasing θI improves ionomer network connectivity but reduces oxygen accessibility, yielding an optimum of θI = 0.65 at both humidities. This work establishes a pore-scale modelling framework to quantify concentration and CCL ohmic losses in coupled oxygen and proton transport, and informs the humidity-dependent structural design of low-Pt CCLs.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.