Skip to content

Integrated first-principles calculation and machine learning-assisted optimization of high-efficiency lead-free Sb 2 Se 3 /Cs 2 TiI 6 double-absorber solar cells

Oct 2026 · International Journal of Modern Physics B · 0 citations · 106 references

Abstract

Perovskite solar cells (PSCs) are widely investigated due to their low fabrication cost, compatibility with lowtemperature solution processing and the continual improvement in power conversion efficiency (PCE). The efficiency of singlejunction architectures is restricted by the Shockley–Queisser limit, which constrains further advances. This study develops a high-performance, lead-free PSC architecture utilizing Sb 2 Se 3 and Cs 2 TiI 6 as complementary absorbers. First-principles calculations were performed to evaluate the intrinsic structural, electronic and optical properties of bulk Sb 2 Se 3 and Cs 2 TiI 6 . The interfacial energy alignment and charge transport in the double-absorber device were subsequently evaluated using SCAPS-1D, through which the device parameters were systematically optimized and the PCE increased from 15.73% to 29.57%. By incorporating realistic losses, including series and shunt resistances, temperature, illumination effects and radiative recombination, a corrected efficiency of 25.79% was achieved. To predict photovoltaic parameters and identify the governing performance factors, five machine-learning models were trained on 1500 simulated datasets, with the light gradient boosting machine (LGBM) exhibiting the highest predictive accuracy. SHapley Additive exPlanation (SHAP) analysis identified the bulk defect density of Sb 2 Se 3 as the dominant factor influencing PCE. These findings underscore the potential of double-absorber inorganic PSCs and demonstrate that integrating first-principles calculations with machine learning can significantly accelerate the development of scalable, high-efficiency photovoltaics.

View source

Similar papers

Open access 2026

Machine Learning-Assisted Optimization of Lead-Free Cs₂AgBiBr₆ Perovskite Solar Cells via ETL/HTL Selection: A Combined SCAPS-1D and Random Forest Approach

The performance of lead-free Cs2AgBiBr6 double perovskite solar cells (PSCs) was investigated using SCAPS-1D simulation, followed by machine learning (ML) assisted modelling of the optimised device. Four device architectures employing ZnO and WS2 as electron transport layers (ETLs) and Cu2O and CNTs as hole transport l...

N. L. Tirupathamma, Tarun Vasamsetti, Saswat Kumar Ram et al. · 0 citations
Open access Oct 2026

DFT and Machine Learning Analysis of Eco‐Friendly Formamidinium Tin Iodide Perovskite Solar Cells: Optimizing Charge Transport Layers Through SCAPS‐1D Simulations

Tin‐based solar cells are the eco‐friendly alternative to the toxic lead‐based cells that are currently in use. In this context, Formamidinium Tin Iodide (FASnI 3 ) emerges as a promising candidate due to its superior performance, exhibiting higher efficiency compared to other options. FASnI 3 is a lead‐free ti...

Rabeya Khan, Md. Rasidul Islam, I. K. G. G. Apurba et al. · 1 citation
Open access Oct 2026

Atomic-level design and device modeling of lead-free Cs2AgSbCl6 double perovskite solar cells through DFT, SCAPS-1D, and predictive algorithms

Lead-free double perovskite solar cells (DPSCs) have emerged as attractive alternatives to conventional lead-based perovskites because of their superior environmental compatibility, enhanced chemical stability, and reduced toxicity. In this research study, the performance of a solar cell architecture FTO/IGZO/Cs2AgSbCl...

Ghazi Aman Nowsherwan, M. Azhar, Miraj ud Din et al. · 0 citations
Oct 2026

Machine learning-guided design of high-performance Nd-doped lead magnesium niobate-lead titanate ceramics for enhanced piezocatalytic applications.

Faced with the dual challenges of energy shortages and environmental pollution, piezoelectric catalysis, an emerging technology that efficiently converts mechanical energy into chemical energy, has attracted growing attention. In this study, the lead-based perovskite Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) was employed as a m...

Jing Wei, Sheng-Hui Xie, Hong-Rui Jia et al. · 0 citations
Open access Oct 2026

Machine‐Learning Assisted Optimized Photovoltaic Performance of Sb2S3/Sb2Se3 Heterojunction Using DFT and SCAPS‐1D

Antimony chalcogenides have earned significant attention as potential absorber materials owing to their suitable bandgaps, high absorption coefficients, and Earth abundance. This work presents a multiscale computational framework combining density functional theory (DFT), SCAPS‐1D simulations, and machine learning (ML)...

Anshu Dewangan, Arundhati Sharma, Ishi Pathariya et al. · 0 citations
Conference Oct 2026

Machine learning-assisted prediction of UV-induced degradation in perovskite solar cells with functional nano-coatings

Although perovskite solar cells (PSCs) now deliver power conversion efficiencies (PCEs) above 25%, ultraviolet (UV)exposure continues to limit their operational lifetime. Functional surface layers can suppress UV-driven damage while preserving useful optical transmission, yet coating design must be considered together...

Yang Yu, Xiang-Dong Liu, Yong-Jun Gao · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.