Oct 2026· Jurnal Kejuruteraan· Vol 38, pp. 3339-3348· 0 citations
Abstract
This paper presents a robust sliding mode control (SMC) strategy for regulating a magnetorheological fluid damper (MRFD) in a semi-active impact isolation system subjected to high-intensity transient loads. Conventional passive and proportional–integral–derivative (PID)based damping systems often exhibit limited adaptability and reduced robustness under rapidly varying nonlinear impact conditions. To address these limitations, a singledegree-of-freedom (SDOF) recoil-type impact isolation model integrated with an Adaptive Neuro-Fuzzy Inference System (ANFIS) based MRFD model is developed. Experimental data obtained under varying impact energies and input currents are utilised to characterise the nonlinear and field-dependent behaviour of the MRFD. The proposed SMC algorithm regulates the input current supplied to the damper in real-time to enhance dynamic response suppression and improve system robustness against uncertainties. Numerical simulations are conducted under low-, medium-, and high-impact energy conditions, and the proposed controller is compared with passive and PID controlled systems. The performance evaluation is based on jerk, acceleration, and transmitted force using root mean square (RMS) analysis. The results demonstrate that the SMC-controlled MRFD consistently outperforms the passive and PID controllers, achieving average reductions of approximately 42%, 41%, and 42% in jerk, acceleration, and transmitted force, respectively. The proposed approach exhibits superior effectiveness under high-impact energy conditions while maintaining a simple control structure and low computational complexity. These findings highlight the strong potential of the proposed SMC strategy for real-time impact mitigation applications, particularly in military recoil systems and industrial shock isolation environments.
This paper proposes a sliding-mode control (SMC) strategy to enhance the dynamic performance and disturbance rejection of high-power DC motors subjected to internal parameter variations, such as armature resistance changes due to temperature rise and inductance fluctuations from magnetic saturation. Conventional PID c...
A. Ebrahim, Maram Naser, Mohsen Khateeb· Ingeniería y Universidad· 0 citations
To address the multivariable coupling characteristics of active magnetic bearing (AMB) systems, as well as the insufficient disturbance rejection capability of conventional PID control, this paper proposes a four-degree-of-freedom (4-DOF) control strategy based on linear active disturbance rejection control (LADRC). Fi...
Hui-Peng Shen, Shi-Hao Qi, Pu-Wen An et al.· 2026 IEEE 7th International...· 0 citations
Conventional virtual synchronous generators (VSGs) employ fixed inertia and damping parameters, resulting in insufficient adaptability to varying operating conditions. Moreover, virtual inertia may cause active-power overshoot and dynamic oscillations and slow down the transient response. To address these issues, a fra...
Feng Wang, Ayiguzhali Tuluhong, Bao Luo et al.· Engineering Research Express· 0 citations
To comprehensively improve vehicle ride comfort and body attitude stability, as well as to enhance the robustness and disturbance rejection capability of the suspension system under uncertain operating conditions, this paper first establishes a full vehicle suspension dynamic model. On this basis, an improved SH-ADD co...
Jie Dai, Xiong Gao, Yi-Bin Jiang· Vehicles· 0 citations