Oct 2026· ACS Applied Materials and Interfaces· 0 citations· 26 references
Medicine
Abstract
Polyelectrolyte-based CO2 electrolyzers are generally limited to operation below 80 °C, primarily restricted by the thermal instability of alkaline polyelectrolyte (APE) membranes and the rapid evaporation/boiling of water at elevated temperatures. Herein, we successfully increased the CO2/pure water co-electrolysis temperature to 100 °C by employing a custom-designed membrane electrode assembly (MEA) electrolyzer. This was enabled by employing a high-temperature-resistant APE membrane (QAPPT) and implementing a back-pressurized cell configuration to avoid water boiling. Using this setup, we systematically investigated the effects of temperature and backpressure on CO2/pure water co-electrolysis performance. Our results demonstrate that elevated temperature and applied backpressure synergistically promote Ag-catalyzed CO2 reduction to CO. Under optimized conditions, the CO2 MEA electrolyzer achieves state-of-the-art CO production performance, exceeding reported benchmarks and highlighting the critical role of operating conditions in CO2 electrolysis.
Paired electrolysis has emerged as a compelling strategy for co-producing value-added chemicals at bipolar electrodes. In electrochemical CO reduction to acetate, conventional coupling with the oxygen evolution reaction (OER) is limited by sluggish anodic kinetics and low energy efficiency. Herein, we report a pressure...
Electrochemical reduction of CO2 in conventional aqueous electrolytes is often limited by low CO2 solubility and the competing hydrogen evolution reaction (HER). To address these challenges, we investigated CO2 electroreduction on a Ni electrode in a nonaqueous methanol/LiCl electrolyte under high CO2 pressure (1.0 MPa...
M. Uzzaman, Mai Furukawa, Ikki Tateishi et al.· RSC Advances· 0 citations
Electrocatalytic conversion of CO2 into chemicals and fuels offers a promising route toward a circular carbon economy. High-temperature CO2 electroreduction in solid oxide electrolysis cells (SOECs) delivers high selectivity and energy efficiency, but balancing mechanical robustness and electrochemical performance rema...
Wen-Chao Ma, Jia-Ming Tian, Jin'an Wang et al.· Journal of the American Chem...· 0 citations
Electrochemical co-electrolysis of CO2 and H2O in solid oxide electrolysis cells (SOECs) provides a promising pathway toward carbon-neutral fuel production and renewable energy storage, yet its efficiency and selectivity remain constrained by the limited reactivity of conventional cathodes. Here, we develop a CeO2/Ni-Y...
Wei Wang, Zhi-Bo Shang, Yi Fan et al.· ACS Applied Materials and In...· 0 citations
Climate change mitigation has spurred interest in producing chemicals from CO2. CO2 reduction by electrochemistry can be driven directly by green electricity, yielding even multi-carbon (C2+) products. However, the resulting processes still suffer from high electrolyzer losses and substantial energy demands. This study...
L. Spiekermann, Mi Gyoung Lee, Joshua Wicks et al.· Nature Chemical Engineering· 1 citation
Gas-fed CO2 reduction reaction (CO2RR) electrolyzers suffer from inherent salt precipitation and performance decay due to hindered salt removal within electrodes. Although electrolyzers that reduce CO2 carried by aqueous electrolytes (e.g., H-cells) naturally avoid salt accumulation, their low CO2 solubility and slug...
Shi-Lei Zhang, Ying-Wei Li, Hang Wang et al.· ACS Sustainable Chemistry &a...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.