Skip to content
Open access

Six-Axis Force Plate Utilizing Sampling Moiré Method and Mirror-Based Optical System With a Single Camera

Nov 2026 · IEEE Sensors Journal · Vol 26, pp. 32163-32170 · 0 citations · 31 references

Abstract

Understanding insect locomotion is important for both biological studies and bioinspired robotics. Although multiaxis force plates have been developed to measure ground reaction forces (GRFs) in terrestrial insects, the simultaneous measurement of six-axis forces and moments remains challenging. In this study, we propose a six-axis force plate based on the sampling moiré (SM) method, using a mirror-based optical system and a single camera. The SM method enables high-resolution in-plane displacement measurement by detecting phase shifts in periodic grating patterns. In the proposed system, four 2-D grid patterns attached along the edges of the force plate are captured through a telecentric lens. The mirror-based optical system provides uniform 45° imaging paths for all patterns, enabling the six-axis force plate to be constructed with a simple optical setup. Calibration experiments confirmed that the measured displacements could be converted into forces and moments along all six axes. The force plate system achieved force and moment resolutions of less than 1.0 mN and 3.0 mN $\cdot $ mm, respectively. These results demonstrate that the proposed method provides a simple and low-cost approach for six-axis GRF measurement in small animals.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.