Skip to content
Open access

Transient Model and Load Voltage Identification Control of Buck–WPT Systems for Wireless-Powered Buses to Achieve Stable Output Voltage Under Wide-Load-Range Conditions

Oct 2026 · World Electric Vehicle Journal · 0 citations

Abstract

Magnetically coupled resonant wireless power transfer technology provides a contactless power supply solution for permanent magnet synchronous motors in urban electric buses. By utilizing road-embedded transmitting coils, energy can be harvested in real time during vehicle operation, thereby avoiding the excessive weight of battery-powered schemes and the wear and arcing issues of trolley-pole contact charging. Nevertheless, frequent start–stop, acceleration and hill-climbing of buses produce wide-range step variations in motor equivalent load, triggering severe output-voltage fluctuations. Existing regulation approaches fail to simultaneously meet demands for wide-load adaptability, fast dynamics and communication-free reliability. This work studies modeling and control for cascaded Buck-WPT systems. A dual closed-loop PI controller adjusts the Buck duty cycle to suppress large voltage disturbances. A primary-side-only output-voltage identification method is further proposed, removing secondary-side sensors and wireless communication. The open-loop transfer function is derived by combining the Buck small-signal model and the generalized state-space averaging model of the WPT network. Prototype experiments verify the performance: under load step-down from 50 Ω to 10 Ω, voltage recovers to 20 V within 0.3 s; for step-up from 10 Ω to 50 Ω, recovery takes 0.28 s with acceptable overshoot and negligible steady-state error. The presented solution supports lightweight wireless bus power systems.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.