Skip to content

Thermo-mechanical coupled analysis and experimental study on laser machining of finger seals

Nov 2026 · Journal of composite materials · 0 citations · 23 references

Abstract

As a sealing technology for aero-engines, finger seals play a crucial role in improving engine thrust-to-weight ratio and reducing fuel consumption. Carbon fiber-reinforced carbon matrix (C/C) composites exhibit excellent self-lubricating and wear-resistant properties, which are well matched to the requirements and application environments of dynamic sealing technology, and can significantly extend the service life of finger seals. This study focused on the laser cutting process of C/C composite finger seals. A numerical simulation model of the laser cutting process was established using thermal-mechanical coupling simulation analysis. Through systematic simulation calculations, the influence patterns of laser processing power and feed speed on workpiece displacement and deformation were analyzed. Actual machining experiments were conducted using a continuous-fiber laser. All experiments adopted the identical laser system, where laser type, wavelength and beam quality remained constant throughout the tests. Combined with practical machining trials, core indicators including cut-surface morphology, multi-directional displacement-deformation, as well as stress-strain distributions were comprehensively investigated. The results show that processing power and feed speed are key parameters for controlling laser cutting quality. Reasonably reducing processing power can effectively suppress workpiece displacement and deformation, while increasing feed speed can narrow the thermal damage range in the cutting zone. The simulation results show good agreement with experimental measurements in terms of variation trends, verifying the rationality of the thermo-mechanical coupling model.

View source

Similar papers

Open access Oct 2026

Thermomechanically Coupled Modeling and Process-Parameter Analysis of Laser-Field-Assisted Hybrid Milling of GH4096 Superalloy

GH4096 is a Chinese nickel-based disk superalloy used for disks and shafts in advanced gas-turbine engines, where creep, fatigue, corrosion resistance, and microstructural stability are service-critical. These requirements are associated with high deformation resistance and thermomechanical loading during milling. Howe...

Hong-Yang Yan, Hong-Qin Lei, Ping Liang et al. · 0 citations
Oct 2026

Thermo-mechanical simulation and forming mechanism investigation for hot stamping of CFRTP hat beams

Hot stamping of continuous fiber-reinforced thermoplastic composites (CFRTPs) offers a fast and cost-effective route for manufacturing lightweight components for automotive and aerospace applications. However, unsuitable process conditions can cause defects and reduce part performance. This study examines how key proce...

He Zhu, Li-Bin Duan, Zhan-Peng Du et al. · 0 citations
Review Open access Oct 2026

The Relationship between Tool Coatings and Process Parameters on Cutting Forces and Wear in High-Speed Machining

This paper provides a comprehensive analysis of cutting force dynamics in High-Speed Machining (HSM), a critical factor for ensuring structural integrity and productivity in advanced manufacturing. The study synthesizes the role of piezoelectric dynamometry and the Finite Element Method (FEM) in predicting and monitori...

N. Sebbe, Andresa Baptista, Gustavo F. Pinto et al. · 0 citations
Oct 2026

Kerf formation mechanism and process control in thick carbon steel plates using laser remote cutting

The dismantling of complex, thick-walled steel structures in nuclear reactors and ship hulls poses significant challenges for traditional mechanical and conventional laser cutting methods due to issues such as tool wear and spatial constraints. This study proposed a novel noncontact dismantling method using laser remot...

Zhu Hu, Chun-Ming Wang · 0 citations
Open access Oct 2026

Experimental Investigation and Finite Element Simulation of Laser-Assisted Turning of H13 Tool Steel

:Laser-assisted machining offers significant advantages in the machining of difficult-to-cut materials. This paper presents an experimental investigation and FE simulation of laser-assisted turning (LAT) of H13 tool steel in longitudinal and face-turning operations. The effect of cutting speed and surface temperature o...

Hamid Ghorbani, Bin Shi, Helmi Attia · 0 citations
Nov 2026

Experimental investigation and parametric analysis of laser-based fusion bonding of polyamide 6 to AISI 1018 low-carbon steel

Abstract This study investigates laser-assisted metal–plastic (LAMP) joining of polyamide 6 (PA6) to AISI 1018 low-carbon steel using a 1 kW fibre laser system. The individual and interaction effects of four key process parameters, laser power, scanning speed, defocus distance, and number of scans, on joint quality are...

Purushottam Kumar, B. Acherjee, J. Ghose et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.