Oct 2026· SinkrOn· Vol 10· 0 citations· 18 references
Abstract
Predicting the ultimate bearing capacity of shallow foundations is crucial in geotechnical planning because it is directly related to the safety and stability of the structure. This is especially true for foundations located at the edge of a slope. However, conventional analytical methods often fail to capture the complex and nonlinear relationships between soil and foundation parameters. This study evaluates the performance of Random Forest (RF) and Extreme Gradient Boosting (XGBoost) ensemble machine learning models for predicting the ultimate bearing capacity (q_ult) of shallow foundations in non-cohesive soils on slopes, with emphasis on methodological rigor and physical model interpretability. The dataset consists of 393 secondary data points obtained from numerical modeling based on the Finite Element Method (FEM) in a previous study. Input variables include slope angle (sin β), foundation width (B), foundation depth (Df), and soil angle of internal friction (tan φ), while ultimate bearing capacity (qult) is used as the output variable. Model performance was evaluated using the coefficient of determination (R²), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), and the A20 index. Both models achieved a test R² of 0.97. XGBoost demonstrated superior generalization with a test RMSE of 7.130 kN/m² and MAPE of 8.833%, while Random Forest achieved a higher A20 index of 88.136% compared to 86.44% for XGBoost.
The seismic bearing capacity of strip foundations located near slopes is a critical design issue in geotechnical engineering, particularly for cohesive–frictional (c–φ) soils where complex failure mechanisms may develop under earthquake loading. While numerical approaches provide reliable predictions, their computation...
Faouzia Kharrachi, Sarah Djouimaa, Adam Hamrouni et al.· Geotechnics· 0 citations
The shear capacity prediction of reinforced concrete (RC) deep beams remains a challenging issue in design of concrete structures. Although the code-based strut-and-tie method is widely accepted, it is often time-consuming for routine design applications, while existing empirical equations are unable to fully capture t...
Z. Meghdadi, M. Shabanlou, M. Shiravand et al.· Scientific Reports· 0 citations
Accurate soil classification is essential for safe and economical geotechnical design such as in foundation selection, slope stabilization, and earthwork construction. Cone penetration testing (CPT) provides continuous resistance profiles, but conventional Soil Behavior Type (SBT) charts can be ambiguous near class bou...
Ivanka Lee· Technological Pathways and D...· 0 citations
In Nigeria, buried steel infrastructure suffers premature failure due to soil-induced corrosion, yet existing degradation models rely on idealized laboratory simulations that ignore real-world soil heterogeneity and welding parameter interactions. This study addresses this critical gap by investigating mechanical prope...
L. M. Ebhota, O. Ogbeide, F. Uwoghiren et al.· International Journal of Phy...· 0 citations
Conventional empirical soil damping models often neglect strain-dependent, site-specific variability in heterogeneous alluvial deposits (sands, silts, gravels), leading to uncertainty in seismic bridge foundation design. This study develops a Random Forest (RF) model to predict strain-dependent damping from routine geo...
R. Singh, Sunil Thakur· Discover Civil Engineering· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.