Skip to content
Open access

THE EFFECT OF ROLLING SPEED AND REDUCTION AMOUNT ON THE STRESS STRAIN FIELD AND MICROSTRUCTURAL EVOLUTION OF 316L STAINLESS STEEL TUBES DURING HOT CONTINUOUS ROLLING

Oct 2026 · Materiali in Tehnologije · 0 citations · 34 references

Abstract

The rolling speed and reduction amount were critical parameters dictating the microstructural evolution and wall-thickness accuracy of seamless steel tubes during hot continuous rolling.In this study, a three-stage finite element (FE) model for 316L seamless tubes was established and coupled with metallographic examination and transmission electron microscopy (TEM) to elucidate the thermomechanical response and deformation mechanisms.FE simulations demonstrated that stress was concentrated predominantly along the outer surface and inner wall rather than within the central core.Elevating the rolling speed intensified deformation non-uniformity and increased the maximum wall-thickness variation, despite mitigating post-rolling inner-wall peak strain through high-strain zone contraction.Conversely, increasing the reduction amount promoted deeper stress penetration into the core, enhanced the inner-wall peak strain, and systematically reduced the average wall thickness.Microstructurally, a gradient transition from refined equiaxed grains at the surface to a bimodal grain-size distribution within the core was identified.TEM and geometric phase analysis (GPA) revealed high-density dislocation entanglements, stacking faults, and Lomer–Cottrell (L–C) locks near the surface, and quantified nanoscale strain gradients validated the FE predictions.This work demonstrated the effective integration of macro-FE modeling with nanoscale TEM-GPA strain mapping to optimize tube-rolling parameters.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.