Skip to content
Open access

DACC: A Performance-Guaranteed Alternative to CACC Under Communication Imperfections

2026 · IEEE Transactions on Automation Science and Engineering · Vol 23, pp. 18081-18095 · 0 citations · 54 references

Abstract

This paper proposes an engineering-achievable Adaptive Cruise Control plus Differentiator (DACC) design as a performance-guaranteed or even-improved alternative to Cooperative Adaptive Cruise Control (CACC) for platooning of connected and autonomous vehicles subject to ubiquitous communication imperfections. In particular, we are concerned with the string stability performance of the vehicle platoon while minimizing the lower bound of the employable time headway for achieving platooning string stability. First, by utilizing the derivative of the measured velocity instead of the communicated acceleration of the preceding vehicle and by incorporating a low-pass filter for the sake of practical applicability of the differentiator, the DACC law is formulated. Second, the corresponding inter-vehicular spacing error propagation equation is established under the Constant Time Headway Policy (CTHP) for inter-vehicular spacing. Then internal stability conditions on the control gains and time headway are derived in terms of the maximum parasitic actuation lag (<inline-formula> <tex-math notation="LaTeX">$\tau _{0}$ </tex-math></inline-formula>) and the filter time constant (<inline-formula> <tex-math notation="LaTeX">$T$ </tex-math></inline-formula>). In addition, a lower bound of the employable time headway is derived as <inline-formula> <tex-math notation="LaTeX">$\frac {2 (\tau _{0} + T)}{1 + k_{a}}$ </tex-math></inline-formula> for achieving string stability of the vehicle platoon, where <inline-formula> <tex-math notation="LaTeX">$k_{a} \in (0, 1)$ </tex-math></inline-formula> is the control gain associated with the derivative of the velocity of the preceding vehicle, together with a co-design procedure developed for the coupled control gains and time headway in a stepwise manner. The inclusion of internal stability in the derived string stability conditions is proved as well. Further, the trade-off design between CACC and DACC is discussed in terms of communication delay and noise, respectively. Finally, comparative simulation results on an illustrative vehicle platoon example together with validations on the Next Generation Simulation (NGSIM) dataset demonstrate the effectiveness and practical applicability of the proposed DACC design. Note to Practitioners—Adaptive Cruise Control (ACC) and Cooperative Adaptive Cruise Control (CACC) are two significant methodologies in connected and autonomous vehicles for achieving prescribed automatic vehicle following performance such as string stability. By comparison, ACC adopts the measured velocity and position of the preceding vehicle using onboard sensors (e.g. radars and LiDARs), while CACC utilizes additional acceleration information of the preceding vehicle communicated via wirelessly vehicular communications (e.g. Vehicle-to-Vehicle (V2V) communication) for improving platooning performance, such as the reduction of the lower bound of the employable time headway for achieving string stability. However, the unfavorable wireless communication imperfections in practice such as delay and noise could dramatically deteriorate the performance and hinder the implementation of CACC. To address this issue, this work proposes an Adaptive Cruise Control plus Differentiator (DACC) design to achieve CACC using only measured velocity and position of the preceding vehicle; where the acceleration of the preceding vehicle is captured via differentiating the measured velocity instead of from wirelessly vehicular communication. For facilitating the practical implementation of the differentiator, a low-pass filter is also incorporated. Under any given maximum parasitic actuation lag (<inline-formula> <tex-math notation="LaTeX">$\tau _{0}$ </tex-math></inline-formula>) and filter time constant (<inline-formula> <tex-math notation="LaTeX">$T$ </tex-math></inline-formula>), this paper provides a lower bound of the employable time headway and develops a stepwise co-design framework with the control gains such that the vehicle platoon achieves both internal and string stabilities. Trade-off design between CACC and DACC in terms of the communication delay and noise is also presented.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.