Skip to content
Open access

System-Level Integration of Vision-Assisted Mission Triggering and Cascaded Control for Simulated Indoor Quadrotor Inspection

2026 · IEEE Access · Vol 14, pp. 170208-170220 · 0 citations · 33 references

Abstract

This paper describes the implementation and indoor validation of an embedded-hardware quadrotor prototype for a simulated patrol task with a physical surrogate target. The platform integrates a TM4C123GH6PZI7 flight controller, an STM32 ground station, onboard YOLOv5s perception, MID360 LiDAR localization, downward time-of-flight altitude feedback, quaternion-based FusionAHRS attitude estimation, and a cascaded PID controller with actuator-saturation handling. The system separates periodic flight stabilization from asynchronous mission-event messaging and routes attitude, horizontal-state, and altitude observations through separate feedback channels. Five physical trials were performed in a 4.5 m $\times 3.5$ m indoor test area with a prescribed altitude setpoint of 1.20 m; the altitude variation observed across the five trials was approximately ±0.10 m. On a held-out single-class surrogate-target test split comprising 49 images and 374 annotated instances, the deployed YOLOv5s detector achieved an mAP@0.5:0.95 of 96.60%. Direct profiling on the MaixCam yielded total detector-processing times of 11.5–14.8 ms/frame under the measured conditions. In all five trials, the system completed one-touch takeoff, permitted-grid coverage, route display, target-statistics reporting, return, and landing. These findings demonstrate reproducible end-to-end operation within the reported indoor test envelope.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.