Skip to content
Open access

Standalone Photovoltaic–Battery DC Fast-Charging Station for Off-Grid Electric Vehicles: Design, Simulation and Consistency Verification

2026 · International journal of research and innovation in applied science · 0 citations

Abstract

Fast chargers for electric vehicles are hard to supply in rural areas with a weak or absent grid. This paper presents the design and simulation of a standalone photovoltaic (PV) DC fast-charging station with battery storage. The station combines a 60.2 kWp array (5 modules in series, 29 strings), a boost converter with a tuned perturb-and-observe (P&O) maximum power point tracking (MPPT) controller, a 220.8 kWh lithium iron phosphate (LFP) battery energy storage system (BESS) and a two-port 50 kW charger, sized for four vehicles and 200 kWh per day. The model was corrected for scaling errors, its voltage levels were aligned with the selected components, and the converter parameters were justified at the rated array power. With a duty-cycle step of 0.2% every 5 ms the P&O controller settles in 0.28 s and extracts 99.99% of the available power at standard test conditions and at least 99.97% during steps and ramps of irradiance and temperature. All simulated voltages, currents and powers stay within the datasheet ratings, the power balance closes to within 10−6, and the charging time is 1.5 to 1.6 times the minimum that the 25 kW ports allow. Daily simulations with variable irradiance, cell temperature and a four-vehicle charging profile give an overall PV-to-vehicle efficiency of 83 to 86%. The array meets the daily demand on a partly cloudy day with 4.5 peak sun hours but serves only 74% of it on an overcast day with 3.2 peak sun hours. The results are compared with published off-grid charging studies.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.