Skip to content

Kinetic Analysis of the Preparation Process and Characterization of Sucrose-based Carbon Foams

Oct 2026 · Progress in Nanoscience and Nanotechnology · 0 citations

Abstract

Carbon foams produced from renewable sucrose through gel-casting, utilizing microcapsules as pore-forming agents, demonstrate low density and adjustable thermal properties. The pyrolysis kinetics, evaluated using the Coats-Redfern method, informed the optimization of sintering conditions, resulting in foams with superior pore morphology and exceptional thermal insulation performance. The precursor was synthesized via gel casting, using sucrose as the carbon source and microcapsules as the pore-forming agent. The pyrolysis behavior was investigated at various heating rates using thermogravimetric analysis, from which kinetic parameters were derived utilizing the Coats-Redfern method. Crystalline phases were characterized by X-ray diffraction (XRD), while morphology was assessed via scanning electron microscopy (SEM). Thermal conductivity was evaluated with a heat flow meter. The as-prepared carbon foams exhibited both open- and closed-cell structures, with low thermal conductivity (0.041 W/m·K) and low density (0.45 g/cm³). Kinetic analysis indicated that the pyrolysis process was best described by reaction orders of approximately 2.0-2.4 across different stages and heating rates, with third-order kinetics providing a reasonable approximation for most stages. The kinetic parameters indicated that reaction orders in the range of 2.0–2.4 provided the best fit for most pyrolysis stages, with slight deviations at higher heating rates in the third stage. By adjusting the microcapsule content, the density and thermal conductivity were systematically modified within the ranges of 0.45–0.57 g/cm³ and 0.041–0.065 W/m·K, respectively, thereby confirming the tunability of the thermal properties. These sucrose-derived carbon foams demonstrate strong potential as highperformance thermal insulation materials.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.