Skip to content
Open access

Sound‐Activated Liquid‐Metal Networks for High‐Performance Stretchable LEDs

Nov 2026 · ChemistrySelect · 0 citations · 23 references

Abstract

The development of flexible and stretchable light emitting diode (LED) circuits requires conductive materials that maintain electrical continuity during repeated mechanical deformation. However, the reliability of liquid metal conductors is limited due to insulating oxide layers and disrupted particle contacts. This work investigates elastomer‐embedded eutectic gallium‐indium (EGaIn) particle networks for flexible LED interconnects. Conductive pathways are realized based on the combination of sonication‐assisted particle synthesis, screen printing and acoustic activation, photopatterning, and localized laser treatment. Acoustic activation induces nanoscale (∼100 nm) bridges between micrometer‐sized (∼2‐3 µm) particles. The obtained network has an electrical conductivity of 2.10 × 10 6 Sm −1 at 74.4 vol% liquid metal content. Interparticle separations < 2 nm suggest that hopping or tunneling may contribute to charge transport. The electromechanical measurements present stable electrical behavior over 2000 stretching cycles with resistance stabilization and recovery times of 145 and 187 ms, respectively. The relative resistance change is linearly dependent on the applied strain in the range studied ( R 2 = 0.989). The integrated LED circuit is powered at 3 V and remains lit during bending and light stretching. These results show the promise of acoustically activated EGaIn networks as conductive interconnects for mechanically adaptive electronic devices.

Read PDF

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.