Thermally driven facet coating degradation in quantum cascade lasers revealed by thermoreflectance spectroscopy
Abstract
Thermal effects remain one of the primary factors limiting the performance, reliability, and lifetime of quantum cascade lasers (QCLs). In this work, thermoreflectance spectroscopy is employed as a high-resolution, non-contact technique to investigate thermally induced degradation of optical facet coatings in operating devices. High-reflection (HR) and anti-reflection (AR) coatings were designed, fabricated, and integrated with mid-infrared QCLs. Although the coatings significantly improved optical output power, reliability testing revealed premature failure associated with coating delamination. Spatially resolved temperature maps enabled direct visualization of self-heating and identification of localized hot spots preceding degradation. Comparative measurements on coated and uncoated devices show that HR-coated lasers degrade at substantially lower drive currents. The onset of coating delamination was observed near 200 °C, while catastrophic failure occurred at approximately 525 °C. These results highlight the importance of thermal management for improving coating stability and device reliability.