Design and Performance Analysis of Power-Delay Optimized Mixed-Logic Decoders for 4T and 6T SRAM Cells
Abstract
This work discusses the design and construction of effective decoder circuits to the Static Random Access Memory, which is an important part of the current digital systems such as processors and cache memories. Focusing on high performance and low power consumption, the work discusses mixed logic methods to optimise the design of decoders to a 5x32 size. Major building blocks of SRAM such as 6-Transistor (6T) and 4-Transistor (4T) memory cells, precharge circuits are designed and tested. All the designs are implemented at the schematic level with Cadence Virtuoso environment with the help of GPDK 90 nm and 45 nm technology libraries. Decoders, SRAM cells, precharge circuits and other modules are individually tested and then interconnected in mixed logic. The operations of the precharge and the memory cell are properly handled by the decoder outputs that make sure that the memory access is carried out efficiently and correctly. The comparative results demonstrate that the 4T SRAM-based decoder achieves consistent reductions in power consumption and Power Delay Product (PDP) compared with the corresponding 6T SRAM-based decoder across the 2×4, 3×8, 4×16, and 5×32 configurations. The simulation results demonstrate that the 4T-based decoder configurations achieve significant power and Power delay product reduction compared with their corresponding 6T-based implementations but the 6T SRAM offers advantages in terms Higher speed and better performance. The results of the simulation prove that the suggested mixed logic approach has great opportunities to improve the functioning of the SRAMs, decreasing the power consumption and improving its performance. It is indicative of the possible power of mixed logic design methods to improve the efficiency of SRAM decoder and memory circuitry in CMOS VLSI designs.