Skip to content
Conference

Simulation and optimization of laser cutting process parameters for ship structural component retrofitting

Oct 2026 · International Conference on Laser, Materials, and Advanced Manufacturing · Vol 14369, pp. 143690G - 143690G-6 · 0 citations · 7 references
Engineering

Abstract

In the retrofitting of ship structural components, laser cutting quality directly affects assembly precision and construction cycle. Taking EH36 marine-grade steel plate as the research object, a three-dimensional thermal-mechanical coupling simulation model for laser cutting was established based on the COMSOL Multiphysics finite element platform. The effects of key process parameters—including laser power, cutting speed, focal position, and assist gas pressure—on cut quality were systematically investigated. An optimization strategy combining orthogonal experimental design with response surface methodology (RSM) was employed, using kerf width, heat-affected zone (HAZ) width, and dross adhesion as multi-objective optimization indicators. The results show that when the laser power is 3.2 kW, the cutting speed is 1.8 m/min, the focal position is 1.5 mm below the plate surface, and the nitrogen pressure is 20 bar, the kerf width is only 0.28 mm, the HAZ width is controlled within 0.45 mm, representing a 23.6% improvement in comprehensive cutting quality compared with traditional empirical parameters. This study provides theoretical basis and data support for the precise control of laser cutting processes in ship structural component retrofitting.

View source

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.