Prediction of Minimum Feed for Capillary Structure Formation by Deformational Cutting
Abstract
The lower technological feed boundary for producing regular capillary structures by deformational cutting is investigated. The objective was to establish a quantitative relationship between the actual angular parameters of a cutting-deforming tool and the minimum feed at which stable finned-relief formation is retained. Experiments were performed on a 0.4 mm thick copper sheet at a cutting depth of 0.24 mm using a high-speed steel R6M5 tool. Six actual tool angles were obtained from three-dimensional grinding models and controlled for the manufactured tools. A linear multivariable model was fitted to 28 observations separated from the results associated with cell formation. Recalculation yielded a relationship between minimum feed and the major and minor cutting-edge angles, rake angles, and inclination angles of the cutting and deforming edges. Leave-one-out cross-validation produced a mean absolute error of 0.0137 mm/rev. The model is intended for preliminary feed assignment within the investigated angular ranges and does not predict capillary or thermal performance of a completed heat pipe.