Thickness-dependent dielectric property of solution-processed Al2O3 high-k films and its impact on TFT performance
Abstract
Solution-based processing has emerged as a promising route for fabricating metal oxide thin-film transistors (TFTs) because of its low cost, simple equipment, and vacuum-free nature. In such devices, the gate dielectric plays a critical role in determining their electrical performance. However, the influence of dielectric thickness on the electrical response of solution-processed aluminum oxide (Al2O3) films and the resulting TFT performance remains insufficiently understood. Here, sol-gel-processed Al2O3 thin films are systematically investigated to clarify the thickness-dependent dielectric behavior and its device-level implications. Metal–insulator-metal capacitors show a pronounced thickness dependence of the apparent dielectric constant, which increases from 5.8 to 10.9 as the Al2O3 thickness increases from 10 to 152 nm. Electrical measurements and x-ray photoelectron spectroscopy analyses suggest that the thickness-dependent dielectric behavior may involve an effective low dielectric constant interfacial contribution, consistent with native silicon dioxide layer at the silicon/Al2O3 interface in ultrathin capacitor structures, together with thickness-dependent changes in Al2O3 chemical bonding states in thicker films. In2O3-based TFTs incorporating Al2O3 dielectrics of different thicknesses further show that device performance deteriorates with increasing dielectric thickness from 36 to 129 nm. The 36-nm device exhibits the best performance, with a field-effect mobility of 3.03 cm2 V−1 s−1. These findings provide guidance for optimizing solution-processed gate dielectrics for high-performance oxide electronics.