Fabrication and Characterization of Bilayer Electrospun Polyvinyl alcohol/Polycaprolactone/Glutamine Membranes Integrated with 3D-Printed Polycaprolactone/Propolis Scaffolds for Skin Tissue Applications

Open access Sep 2026

Development and Characterization of a Dual Nanofibrillar Membrane of Polylactic Acid Loaded with Hydroxyapatite and Chlorhexidine for Guided Bone Regeneration

The findings demonstrate the feasibility of producing bilayer PLA membranes incorporating nano-HA and CHX while maintaining suitable physicochemical characteristics and cellular compatibility.

Jose Roberto Sauma, Diego Batista-Menezes, Silvia Maldonado-Frías et al. · Polymers · 0 citations

Save

Copy APA Copied ✓ Copy MLA Copied ✓ Copy BibTeX Copied ✓

Aug 2026

3D-Printed Poly(ε-Caprolactone)/CaCO3 Biocomposite Meshes for Bone Tissue Engineering: Enhanced Mechanical Strength and Cytocompatibility

Poly(ε-caprolactone) (PCL) is a biodegradable and biocompatible polyester widely used in biomedical scaffolds. However, its relatively low mechanical strength and limited cell adhesion properties remain major challenges for bone tissue engineering applications. This study developed a 3D-printed PCL mesh enhanced with...

Tanyaluck Mekpothi, Manasanan Namhongsa, Kittisak Yarungsee et al. · ACS Applied Polymer Material... · 0 citations

Save

Copy APA Copied ✓ Copy MLA Copied ✓ Copy BibTeX Copied ✓

Open access Aug 2026

Electrospun Chitosan/Collagen Fibers Incorporating PLGA and Hydroxyapatite Nanoparticles for In-Vitro 3T3 Fibroblast Migration

3D scaffolds based on Chitosan/Collagen/Poly(lactic-co-glycolic acid) (PLGA)/Hydroxyapatite (HAp) nanoparticles are presented as a promising approach to studying the migration of the 3T3 cell line and demonstrate promising effects on fibroblast migration in an in vitro scratch-assay model using NIH 3T3 cells.

Laila Procel-Badillo, Sarah Briceño, Lenin Ramírez et al. · Polymers · 0 citations

Save

Copy APA Copied ✓ Copy MLA Copied ✓ Copy BibTeX Copied ✓

Open access Aug 2026

Shear-Thinning Composite Hydrogel Incorporating Polycaprolactone (PCL) Short Nanofibers for Cell Therapy Applications.

This work optimized polycaprolactone (PCL) short nanofibers production and combined them with a soft hydrogel based on kappa-carrageenan and gelatin type B (kCGb) to perform umbilical cord pericyte (UCP) delivery and promote re-endothelialization of injured blood vessels.

A. Jawad, C. Heiss, V. Stolojan et al. · Journal of Biomedical Materi... · 0 citations

Save

Copy APA Copied ✓ Copy MLA Copied ✓ Copy BibTeX Copied ✓

Sep 2026

Electrospun PVA nanofibers reinforced with chitosan and alginate biopolymers: Optimization of formulation and processing parameters for biomedical applications

This study investigates the development of poly(vinyl alcohol) (PVA)-based nanofibers reinforced with chitosan (CTS) and alginate (ALG), focusing on their structural and functional properties. Neat PVA, PVA/CTS, and PVA/ALG nanofibers were fabricated by electrospinning under varying parameters: PVA concentration (2–1...

K. Zdiri, Floriane Leclinche · Proceedings of the Instituti... · 0 citations

Save

Copy APA Copied ✓ Copy MLA Copied ✓ Copy BibTeX Copied ✓

Open access Sep 2026

Characterization and in vitro evaluation of double cross-linked PVA/chitosan-alginate biocomposite scaffolds coated with turmeric extract produced by 3D bioprinting.

In this study, novel 3D bioprinted composite scaffolds were developed using Polyvinyl alcohol (PVA), chitosan (CS), sodium alginate (Alg), and turmeric (Tur) to investigate their potential as advanced bioactive platforms for wound healing and drug delivery. The scaffolds were fabricated via extrusion-based bioprinting,...

Alp Erdogan Oztürk, Fatih Ciftci, A. C. Calikoglu Koyuncu et al. · Journal of The Mechanical Be... · 0 citations

Save

Copy APA Copied ✓ Copy MLA Copied ✓ Copy BibTeX Copied ✓