Skip to content

Mechanisms of local flexible membrane leeward surface on airfoil aerodynamic performance

Jul 2026 · Journal of Fluid Mechanics · Vol 1038 · 1 citation · 60 references

Abstract

Abstract Content of image described in text. An experimental investigation is conducted in a wind tunnel on a NACA0012 airfoil with a partially flexible polydimethylsiloxane membrane leeward surface extended from 16.7 % to 83.3 % of the chord length. Aerodynamic forces, membrane deformation and the surrounding flow field are measured simultaneously. The results show that membrane vibration effectively reduces the extent of the recirculation zone, thereby improving aerodynamic performance. Specifically, the stall angle is delayed by 3 Superscript ring 3∘ $3^\circ$ , and the maximum lift coefficient is increased by 12.4 % compared with that of the rigid airfoil. Novel insights into the flow–structure interaction are established from both spatial and temporal perspectives. Spatially, comparisons across angles of attack reveal that membrane vibrations driven by strong pressure fluctuations near the trailing edge can propagate upstream, accompanied by modifications in the distribution of turbulent kinetic energy and enhanced flow mixing. Temporally, a detailed analysis of the strongly periodic membrane motion and unsteady flow structures near stall further demonstrates that the membrane dynamics is tightly coupled with the evolution of the leading-edge vortex. This coupling is associated with the modulation of coherent flow structures through periodic absorption and release of mechanical energy. Overall, the flexible membrane can provide effective flow control by reorganising the spatio-temporal distribution of energy within the flow via flow–structure interaction, without external energy input. The findings provide insights into potential low-energy flow-control strategies.

View source

Similar papers

Open access Sep 2026

Drag Reduction Mechanism of Bionic Riblets and Their Application on Centrifugal Fan Blades

Bio-inspired riblet technology has progressed in recent years in suppressing near-wall flow separation and reducing drag. However, significant benefits are obtained only when the riblet geometry matches the local flow conditions. Further study is still required before riblets can be reliably applied to low-speed fan bl...

Xiao-Pei Yang, Bin Zuo, Qian-Hao Xiao · 0 citations
Sep 2026

Experimental investigation on the influence of herringbone riblets on the incident shock/turbulent boundary layer interactions

Shock/turbulent boundary layer interactions (STBLIs) seriously affect the structural safety and aerodynamic performance of supersonic/hypersonic engine inlets. Herringbone riblet (HR) is a promising passive flow control device, yet its influence on the incident STBLI remains unclear. In this paper, the influences are e...

Xi-Wang Xu, Zi-Hao Ye, Jun-Can Lin et al. · 0 citations
Aug 2026

Wake manipulation on a NACA 0018 airfoil using trailing edge dielectric barrier discharge plasma actuators

Abstract Active flow control at low Reynolds numbers remains a critical challenge for unmanned aerial vehicles and rotorcraft blades, where severe boundary layer separation on symmetric airfoils degrades aerodynamic performance. This study investigates the aerodynamic effectiveness of localized dielectric barrier disch...

Tayfun Cobanoglu, Gokcen Jurnal, Nursena Sevinc et al. · 0 citations
Oct 2026

Investigation of formation mechanism and flow pattern evolution of ventilated supercavity regulated by cavitator geometry with annular hydrofoil

This paper experimentally and numerically investigates the transient evolution of ventilated supercavitation regulated by an annular hydrofoil, focusing on the effects of axial position, angle of attack, and diameter on cavity morphology, internal velocity, and pressure fields. The results reveal that the hydrofoil cav...

Chao Liu, Liang Hao, Yue Wu et al. · 0 citations
Oct 2026

Effect of surface protrusions on the formation and evolution of ventilated attached cavities over a curved wall

Large-eddy simulations coupled with the Schnerr–Sauer cavitation model were performed in a simplified curved-wall configuration to investigate ventilated cavity formation downstream of a surface protrusion. The numerical method was validated against water-tunnel data, reproducing the observed cavity morphology and pred...

Hao Xu, Zhi-Kun Cai, Zhou Zhou et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.