This paper proposes a fixed-frequency isolated three-port converter (ITPC)that simultaneously realizes topology-level power decoupling, RMS-current minimization, and wide-range zero-voltage-switching (ZVS) extension. The main novelty is the coordinated use of an LC-resonant decoupling network, a switch-controlled-capacitor (SCC)-based equivalent-impedance regulator, and auxiliary-current injection. In contrast to existing three-port converters in which decoupling and ZVS extension are usually treated separately, the proposed ZVSRE-ITPC uses the SCC not only for power regulation but also to shift the ZVS boundary under the optimized modulation strategy. By matching the resonant frequency of each LC tank to the switching frequency, the direct power-transfer path between ports 2 and 3 is eliminated. An root-mean-square-current-minimized optimized modulation strategy (RMS-OMS) is further derived using the Karush–Kuhn–Tucker framework. Under the prototype parameters, the SCC reduces the critical ZVS power-transfer boundary of port 3%–14.63% of the original boundary, and the auxiliary inductor enables port 1 ZVS over the investigated operating range. A laboratory prototype verifies the power decoupling, RMS-OMS, dynamic transient response, efficiency improvement, and ZVS range extension.
Based on the traditional Single-Phase-Shift (SPS) modulation, the control method of Dual Active Bridge (DAB) converter is improved in this paper. By introducing the cross-conduction constraint mechanism in the secondary bridge arm, the overlapping conduction region of the switch is effectively limited, and the three-le...
Yi-Yang Tan· MATEC Web of Conferences· 0 citations
The transition of the USB Power Delivery (USB-PD) standard from fixed 5–20 V profiles to the dynamic extended power range (EPR) of up to 48 V and 240 W has redefined the constraints of isolated AC–DC conversion for high-density adapters and chargers. Delivering high efficiency simultaneously at low (5 V) and high (28–4...
Noel Rodríguez, Diego P. Morales, Jorge Perez-Martinez et al.· Energies· 0 citations
This paper introduces a new -segment interleaved flying-capacitor LLC converter topology with high output present day applications. as compared to a traditional -section LLC converter, the new converter provides a single capacitor that contributes to lower voltage stress at the number one facet’s switches, mechanically...
Addanki Gopinadh, Narendra Vanigina, G. Krishna Reddy· Journal of Science & Technol...· 0 citations
Multilevel inverters (MLIs) are widely used in energy-conversion systems because they generate high-quality AC voltages with reduced harmonic distortion. However, existing MLIs often require numerous power devices, multiple DC sources, voltage sensors, or dedicated capacitor-balancing controllers, which increases both...
Taoufiq El Ansari, Ayoub El Gadari, Y. Ounejjar· International Journal of Pow...· 0 citations