With the increase in DC voltage levels in aircraft electrical networks up to 540 VDC, it is essential to improve the understanding and characterization of fault arcs. This article focuses on the characterization of opening electric arcs in air, between 100 and 1000 hPa, through static electrical quantities, namely the...
C. Pietri, R. Landfried, T. Leblanc et al.· Applied Sciences· 0 citations
The high reliability and safety provided by the compressed gas insulated substations(CGIS) has proved that the they are more advantageous than the conventional air insulated substations. All the parts of the GIS are enclosed in metal enclosures which are filled with SF6gas, which has higher breakdown strength than air....
P. Reddy, S. Tulasiram· Journal of Science & Technol...· 0 citations
Sharp edges and corners of conductive patterns on dielectric substrates locally intensify the electric field, which is a primary source of partial discharges (PD) in high-voltage electronics. This study investigates the in-plane edge radius of a conductive path as a critical design parameter governing PD inception. Ste...
P. Kvasnička, T. Kupilík, Jan Jindacek et al.· 2026 International Conferenc...· 0 citations
RELEVANCE of the study is to obtain new experimental data to improve the reliability of electrical equipment diagnostics using partial discharge (PD) measurements.
THE PURPOSE. To determine the characteristics of partial discharges occurring within a single air defect located in a solid insulation.
METHODS. To achiev...
F. Nyetereye, A. E. Usachev, S. Boboev et al.· Power engineering (Barringto...· 0 citations
The dielectric and electric conduction properties of BaTiO3 samples fabricated by the spark plasma sintering with additional contamination by different content of carbon have been investigated in the temperature range from 77 through 408 K in small non-heating electric fields and in the range of 77 - 200K under strong...
O. Pylypchuk, T. Kuzmenko, D. Stetsenko et al.· 0 citations