Jul 2026· 2026 8th International Conference on Electronics and Communication, Network and Computer Technology (ECNCT)· pp. 63-67· 0 citations· 16 references
Abstract
Multiple-input multiple-output (MIMO) technology is widely adopted in modern wireless communication systems to enhance transmission rate and link reliability. Linear detection algorithms are popular MIMO receivers due to their moderate computational complexity. This paper comprehensively investigates the bit error rate (BER) performance of two classic linear detectors, namely zero-forcing (ZF) and minimum mean-squared error (MMSE), over Rayleigh fading channels. A series of Monte Carlo simulations are carried out under diverse system configurations, including different MIMO antenna scales, quadrature amplitude modulation (QAM) schemes and varying signal-to-noise ratios. We first compare the performance of 2×2 MIMO with 16QAM and 4×4 MIMO with 4QAM. Furthermore, the influence of the number of receive antennas on detection performance is analyzed in detail. Simulation results demonstrate that MMSE detector outperforms ZF detector across all test scenarios, as it effectively suppresses the noise amplification effect existing in ZF detection. Increasing the number of receive antennas can bring considerable diversity gain and greatly reduce system BER. In addition, larger antenna arrays combined with low-order modulation can achieve better communication reliability. This work reveals the trade-off among antenna configuration, modulation mode and detection scheme, and provides valuable references for the practical design of MIMO wireless systems.
Detection performance in MIMO communication systems is commonly analyzed in terms of Signal to Noise Ratio (SNR), channel conditions, and detector design. However, the role of post-equalization feature-space geometry in shaping detection behavior remains insufficiently understood. In this paper, a geometry ratio, defin...
Hussam Alraie, Kashif Ali, Abdullah Alraee et al.· IEEE Open Journal of the Com...· 0 citations
One of the key challenges is the ability to communicate at high data rates while maintaining a low Bit Error Rate (BER) with improved diversity gain-the demands of the state-of-the-art 5G wireless communication systems. For a Multiple-Input Multiple-Output (MIMO) based 5G system, this work proposes an Optimized Linear...
Sagar Sutar, Chetan G. More· International Journal of Ele...· 0 citations
This paper investigates the EE–SE trade-off in a downlink Massive MIMO system with Minimum Mean Square Error (MMSE) channel estimation (CE) and different linear combining and precoding techniques, confirming that MMSE-based CE provides higher spectral efficiency than the MR, ZF, RZF, and S-MMSE schemes, albeit at incre...
Raed S. M. Daraghma· Journal of Low Power Electro...· 0 citations
Cell-free massive multiple-input multiple-output (CF-mMIMO) is a promising architecture for future wireless networks, yet its practical deployment is severely hindered by hardware impairments and time-varying channel conditions. To address these challenges, we investigate downlink transmission in a rate-splitting multi...
Le-Chen Li, Yao Zhang, Wenchao Xia et al.· 2026 IEEE/CIC International...· 0 citations
This paper focuses on the improvement of the Massive MIMO-based OTFS systems by implementing the systems using more advanced signal transforms such as Discrete Wavelet Transform and Fractional Fourier Transform under various fading channels.
Arashid Ah.Bhat, L. Kansal· International Journal of Ele...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.