2026· International Journal for Simulation and Multidisciplinary Design Optimization· Vol 17, pp. 16· 0 citations· 17 references
Abstract
Complex wind farm environments cause severe spatial aliasing and signal attenuation in blade acoustic signature monitoring. This paper presents an acoustic sensor array topology optimization method based on multi-physics simulation for high-fidelity acquisition of weak voiceprint features. A three-dimensional sound field model coupling aerodynamic noise and mechanical vibration quantifies sound propagation under varying wind speeds and yaw angles. A heuristic particle swarm algorithm discretely optimizes microphone array coordinates on tower and nacelle surfaces by maximizing the signal-to-noise ratio. A surrogate model accelerates sound field evaluation while eliminating nodes disturbed by strong wind vortices. Experiments on a public blade crack acoustic dataset show that the optimized array reduces normalized root mean square error by 44.4 percent compared to conventional spiral arrays, and the proposed attention-based multi-scale network achieves an area under the curve of 0.967 and recall of 0.913.
To reduce the need for scheduled wind turbine blade inspections and large‐scale repairs, a novel distributed acoustic sensing system for monitoring the structural health of wind turbine blades is proposed. This integral passive monitoring system utilizes a sparse array of in‐blade multimodal sensors and a single blad...
Connor Pozzi, C. Ng, Sage Lyon et al.· Wind Energy· 0 citations
To enhance aerodynamic performance and suppress operational noise of roof-mounted concentrator wind turbines, this study proposes a synergistic scheme integrating concentrator cascade structural optimization and blade tip leading-edge perforation. First, Venturi-effect-based 3D numerical simulations optimized cascade p...
Offshore wind power development is expanding from nearshore fixed projects to large-capacity, clustered and deep-sea floating projects. As a result, underwater noise generated during construction, operation and decommissioning activities has become a key constraint in environmental impact assessment and engineering per...
Zhi-Shao Li· Applied and Computational En...· 0 citations
UAVs are being employed for inspection, mapping, emergency response, and low-altitude activities. However, propeller fractures, edge wear, tip loss, imbalance, motor-bearing deterioration, eccentric shafts, and operating circumstances might damage their propulsion systems. Acoustic health monitoring is promising for th...
This paper investigates crack-severity identification in a simplified isotropic steel blade using finite-element-generated multi-point acceleration responses. A finite element model of an equal-section S822 blade is established with four states: healthy, 1 mm crack, 3 mm crack, and 6 mm crack. Twenty transient response...
Ming-Fei Liu, Cun-Wei Tian, Jia-Qi Ye et al.· 2026 6th International Confe...· 0 citations
Abstract Content of image described in text. We perform the acoustic characterization of a model-scale wind turbine, including the tower and a fully reflective ground surface. The study constitutes the natural extension of the research presented in Rismondo et al. (J. Fluid Mech., 2025, vol. 1024, p. A33), where the is...
Giacomo Rismondo, G. Petris, V. Armenio· Journal of Fluid Mechanics· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.