Skip to content
Open access

Injectable Hydroxyapatite and Tetracalcium Phosphate Granules Combined with Autologous Bone Marrow Concentrate: Toward Shape-Adaptive, Single-Step Bone Regeneration

Sep 2026 · Journal of Functional Biomaterials · Vol 17, pp. 456 · 0 citations · 33 references
Medicine

TL;DR

Injectable HA/TTCP granules + oBMC represent a promising single-step strategy for irregular bone defects, although further coating optimization is needed to preserve biological performance while maximizing handling advantages.

Abstract

Background: Injectable bone graft substitutes offer a practical alternative to preformed ceramic scaffolds by adapting to irregular bone defects while preserving osteoconductive properties. This study investigated the in vivo performance of hydroxyapatite/tetracalcium phosphate (HA/TTCP) granules, uncoated or alginate-coated, with or without autologous ovine bone marrow concentrate (oBMC), in a standardized sheep bone defect model. Methods: oBMC was characterized for cellular composition, viability, and recovery. Implanted HA/TTCP formulations were evaluated after 6 and 12 weeks by micro-computed tomography and histomorphometry. Results: Uncoated HA/TTCP granules promoted bone formation, integrating with host bone. Alginate coating improved injectability and handling but influenced granule organization and degradation. Uncoated HA/TTCP + oBMC showed a more favorable response than the coated formulation, with higher bone-to-implant contact (p = 0.004) and bone volume (p = 0.031) at 12 weeks. A modest increase in peri-implant bone volume was observed from 6 to 12 weeks in the HA/TTCP + oBMC group, though this did not retain statistical significance once clustering was accounted for. No significant direct effect of oBMC was observed compared with the cell-free formulation. Conclusions: Injectable HA/TTCP granules + oBMC represent a promising single-step strategy for irregular bone defects, although further coating optimization is needed to preserve biological performance while maximizing handling advantages.

Read PDF

Similar papers

Open access Sep 2026

Enhanced Osteoinduction, Rheological and Mechanical Performance of 3D-Printed Methylcellulose-Gelatin-Hydroxyapatite Scaffolds

These complementary functions reconciled structural stability with osteogenic performance, supporting the MC/GEL/HA system as a tunable bioink platform for non-weight-bearing bone regeneration, while warranting further in vivo validation.

Ceren Yuksel, S. Chow, Ryota Hirose et al. · 0 citations
Open access Sep 2026

3D printed biomimetically hierarchical porous scaffolds from amorphous polyaryletherketone with nanohydroxyapatite for bone repair.

In vitro results reveal that nHA/PAEK-N implants possess favorable biocompatibility, biomineralization capacity, and protein adsorption ability which promote the adhesion, proliferation, and osteogenic activity of bone marrow mesenchymal stem cells (BMSCs).

Xin-Ming Gu, Jing Zhou, Hong-Hua Wang et al. · 0 citations
Oct 2026

Histological and Histomorphometric Evaluation of a Silicate-Substituted β-Tricalcium Phosphate Putty in Alveolar Ridge Preservation: A Case Report With 3-Year Follow-Up

Silicate-substituted calcium phosphates have emerged as a promising class of bone graft substitutes in hard tissue engineering, with preclinical studies demonstrating enhanced osteoconductive and osteoinductive properties. However, their biological performance and bone regenerative potential in oral surgery and impla...

M. Leventis, Ioannis Vergoullis, T. Fretwurst et al. · 0 citations
Oct 2026

Bioactive Injectable Brushite Cement Reinforced With Platelet‐Rich Plasma for Bone Regeneration

Injectable bone substitutes (IBSs) made from brushite‐calcium phosphate are promising biomaterials for bone tissue regeneration, offering favorable setting kinetics and excellent biocompatibility. However, relatively poor mechanical properties limit their application primarily as filler materials in orthopedic and cr...

H. Begam, S. K. Nandi, Bishista Das Gupta et al. · 0 citations
Open access Sep 2026

Revitalizing bioinert PCL: A biomimetic 3D-Printed gradient-pore scaffold with CSMA hydrogel-mediated BMP-2/QK delivery for vascularized bone regeneration.

Critical-sized bone defects exceed bone's regenerative capacity and require space-maintaining implants that support vascular and bone-tissue ingrowth. Three-dimensional (3D)-printed polycaprolactone (PCL) scaffolds are widely investigated for bone repair owing to controllable geometry, interconnected macropores, and st...

Ze-Kun Zhang, Chun-Jiao Huang, Wen-Bin Hu et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.