Skip to content
Log in
Sponsored AI Networking Cookbook: Practical recipes for AI-assisted network automation and development AI Networking Cookbook: Practical recipes for AI-assisted network automation and development

Similar papers

Aug 2026

Manufacturing, Progressive Damage Modeling, and Multiobjective Optimization of 3D Angle‐Interlock Woven Composites Under Tensile Loading

This study investigates the manufacturing process, progressive damage behavior, and multiobjective structural optimization of 3D angle‐interlock woven composites (3DAWCs) fabricated via the resin transfer molding process. The 3DAWCs consist of T700‐12K carbon fiber preforms and an epoxy matrix system (LT‐5028A/B). A re...

Yibo Gao, Xiao-Yong Li, Jian Zhao et al. · 0 citations
Open access Oct 2026

Experimental Investigation and Taguchi Optimization of Print Parameters Affecting the Tensile Strength of 3D-Printed PLA Parts

This study systematically investigates and optimizes the influence of Fused Deposition Modeling (FDM) process parameters on the macroscopic tensile strength of polylactic acid (PLA) components. Addressing the need for predictable structural performance in 3D-printed parts, the novelty of this work lies in establishing...

Mehdi Moayyedian, M. Hedayati-Dezfooli, M. Fayed et al. · 0 citations
Sep 2026

Multiscale Experimental and Simulation Insights Into Flexural Damage Mechanisms and Porosity Sensitivity of 3D Orthogonal Woven Composites

This study uses multi‐scale experiments and high‐precision predictive simulations to reveal the bending failure mode and porosity sensitivity of three‐dimensional orthogonal woven composites (3DOWC). X‐ray computed tomography (CT) and metallographic analysis yielded average porosity (1.78%) and yarn geometric paramet...

Jin-Sheng Yang, Jian Zhao, Wan-Xia Wu et al. · 0 citations
Sep 2026

Influence of weave architecture on the tensile properties of aramid 3D warp interlock woven composites for structural applications

As three-dimensional (3D) fabrics are increasingly used as reinforcement, tailoring fabric architecture to achieve desired physical and mechanical properties has become essential. In this study, two distinct layered 3D warp interlock fabrics with different numbers of warp layers were designed. By further varying weft d...

Jin Hui, Ya-Wen Zhao, Xiao-Mei Huang et al. · 0 citations
#reinforcement learning Review Sep 2026

Three-dimensional woven fabric composites under ballistic impact: A systematic review of multiscale modeling strategies from fiber to structural scale

Three-dimensional woven fabric composites (3DWFCs) provide superior through-thickness reinforcement and delamination resistance under ballistic impact, yet no multiscale modeling framework has achieved broad, independently validated predictive capability across architectures and impact regimes. This systematic review...

Qing-Song Wei, Xi Liu, Lvtao Zhu et al. · 0 citations
Aug 2026

Evaluation of the roughness and UTS of 3D-printed nylon with standard and combined structures

This study evaluates the ultimate tensile strength (UTS) and surface roughness in 3D-printed Nylon PA66 for three standard infill patterns (starred, concentric, and linear) and two novel combined designs (starred-concentric and starred-linear). Extrusion temperature was considered as a secondary variable (260 °C, 270 °...

Fidencio Tapia, J. H. Díaz-Aguilera, H. R. Acevedo-Parra et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.