Magnetic properties and structural investigation of nanostructured Fe60Al35Zn5 alloy synthesized by mechanical alloying for potential applications in magnetic sensors and solar energy devices

Synthesis and microstructural characterization of nanostructured Fe50Ni50 alloy prepared by mechanical alloying

In this comprehensive study, the synthesis, phase evolution, and microstructural characteristics of nanostructured Fe50Ni50 alloy powders produced via high-energy mechanical alloying (MA) were systematically investigated. Elemental iron and nickel powders were processed in a high-energy planetary ball mill under a cont...

Synthesis and investigation of the structural, dielectric, and magnetic properties of copper spinel ferrite (CuFe₂O₄) prepared via a self-combustion sol–gel method

Evaluation of the Influence of Tantalum on the Microstructural, Mechanical and Electrochemical Properties of Ti–Mo–Zr–xTa Alloys for Use in Biomedical Devices

New titanium alloys for biomedical applications are being developed to avoid the use of aluminum and vanadium, which may raise concerns regarding their long-term biological effects. In this study, the effect of tantalum content on the microstructure, hardness and electrochemical behavior of Ti–Mo–Zr–xTa alloys (x = 5,...

Synthesis of Si3N4 and Graphite Reinforced Composites: Impact of Hybrid Particles on the Mechanical and Wear Characterization of Al7020 Aerospace Alloy

Structural, Morphology and magnetic properties of nanostructured Ag doped BaSrFe12-xO19 hexaferrite nanoparticles prepared by Auto combustion method

Ag doped Ba strontium hexaferrite AgBaSrFe12O19 were prepared using urea precursor by auto combustion method. Samples were characterised by using different measurement techniques. X-ray diffraction (XRD) confirmed the formation of M phase with an average crystallite size of 24–45 nm. Observed tensile strain leads to th...

Integrated Alloy Design And Additive Manufacturing Of Low-Density Fe-Mn-Al-Ni-Cr-C Steel: Gas Atomization, Laser Directed Energy Deposition, And Microstructure-Property Relationships

This study introduces a new low-density steel (LDS) with an austenitic matrix strengthened by a stable, finely dispersed B2 intermetallic phase to optimize strength and toughness. The alloy was produced through vacuum induction melting and casting, followed by gas atomization to create spherical powders suitable for ad...