Skip to content
Conference Open access

Design and Implementation of a Multi-Sensor Fusion Quadrotor System for Indoor Wildlife Inspection

Aug 2026 · 2026 International Conference on Embodied Intelligence, Robotics, and Control Systems (EIRCS) · pp. 158-161 · 0 citations · 8 references

Abstract

Indoor wildlife inspection is difficult for small unmanned aerial vehicles because GPS is unavailable, manual patrols are inefficient, and recognition results must be coupled with safe route execution. This paper presents an embedded quadrotor inspection system that integrates UWB positioning, optical-flow velocity estimation, laser/barometric altitude sensing, IMU attitude measurement, LoRa communication and onboard AI vision. The flight controller is implemented on an STM32F429 platform with a position-velocity cascaded PID controller. A grid-based coverage planner generates inspection routes under no-fly-zone constraints, while a MaixCam Pro module performs animal recognition and counting. Experiments in a 5.0 m by 4.0 m indoor testbed show that the system completes inspection flights within 248.6—261.3 s, maintains path deviation within 2.5—3.0 cm, and reaches an average recognition accuracy of 90.0%. The results demonstrate a deployable low-cost solution for GPS-denied indoor wildlife inspection.

Read PDF

Similar papers

Open access 2026

Development of an Edge-AI Autonomous UAV Control System for Navigation and Perception in GPS-Denied Environments

In aerospace research on the cross-cutting growth of unmanned aerial vehicles (UAVs) in inspection, monitoring, and emergency response use cases, reliable operation in environments that are constrained by navigation and communication infrastructure is an issue of vital importance. Conventional UAV systems have a strong...

A. Tulembayev, G. Baiseitov, Z. Kutpanova et al. · 0 citations
Open access 2026

System-Level Integration of Vision-Assisted Mission Triggering and Cascaded Control for Simulated Indoor Quadrotor Inspection

This paper describes the implementation and indoor validation of an embedded-hardware quadrotor prototype for a simulated patrol task with a physical surrogate target. The platform integrates a TM4C123GH6PZI7 flight controller, an STM32 ground station, onboard YOLOv5s perception, MID360 LiDAR localization, downward tim...

Jia-Pei Zeng, Hai-Xu Liu, Qin-Shu Jiang et al. · 0 citations
Open access Nov 2026

Autonomous Navigation and Safe Landing of an Aerial Vehicle in a GPS-Denied Martian Environment

Objectives: To develop and evaluate a real-time, low-power multi-sensor fusion framework that performs localization and safe landing-zone detection together for an aerial vehicle operating over Martian terrain, where neither GPS nor prior maps are available. Method: A stereo camera (Intel RealSense D435i), a rotating 1...

Khushi D. Thakkar, Meet Jain, Harshid B. Rawal et al. · 0 citations
Conference Open access Oct 2026

GHAAT: An End-to-End Autonomous Counter-UAV Framework with Vision Guidance and Net Capture

Unauthorized Unmanned Aerial Vehicle (UAVs) lacking Global Positioning System (GPS) or Radio Frequency (RF) signatures pose significant security challenges. This paper presents Guarding High-value Airspace Against Threats (GHAAT), an autonomous vision-based UAV interception framework integrating detection, localization...

Shameer Ashraf, M. Hassan, Ali Hassan et al. · 0 citations
Sep 2026

Design of autonomous obstacle avoidance system for multirotor unmanned aerial vehicles based on MID-360 LiDAR

This paper presents a lightweight, integrated autonomous obstacle avoidance system for quadrotors utilizing a MID-360 solid-state LiDAR that achieves ultra-low latency trajectory re-planning and ensures robust collision-free flight against both static and dynamic hazards, exhibiting superior execution efficiency and sa...

Hong-Yu Fan, Yan-Li Wang, Wen-Xuan Chen · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.