Investigation of Hydraulic Instability During the Transient Process from Synchronous Condenser Pumping Mode to Pumping Mode

Abstract

The transition process from synchronous condenser pump (SCP) mode to pumping mode determines the response rapidity of the startup procedure and operational stability of pump-turbines; however, the complex gas–liquid interaction and transient hydraulic characteristics during this process remain insufficiently understood. To address this, this study develops a numerical framework for the SCP-to-pumping transition process, incorporating the full-passage system, a multiscale mesh strategy for coupling mainstream and clearance flow regions, and a gas–liquid two-phase flow model based on the Volume of Fluid (VOF) method. The reliability of the numerical model is verified through comparison with model experiments, demonstrating good agreement between simulations and experimental data. Based on the validated model, the transient evolution of hydraulic forces, pressure pulsations, and internal flow structures is systematically analyzed. Axial force analysis reveals a significant internal equilibrium; the crown bears a maximum instantaneous fluctuation of approximately 2800 kN. Conversely, the radial force is primarily dominated by blade hydraulic thrust (1294 kN), showing distinct anisotropic behavior. The runner blade channels and the upper draft tube region are identified as critical areas with intense pressure fluctuations, with peak-to-peak pressure amplitudes reaching 45~48 m and 54 m head, respectively. Furthermore, reducing the duration of the exhaust process constitutes the main strategy for accelerating the transition and mitigating prolonged high-amplitude force and pressure fluctuations. The findings provide new insights into the transient hydraulic mechanisms of SCP-to-pumping transitions and offer guidance for optimizing transition control strategies in pumped-storage units.