Skip to content
Open access

Optimized Modeling and Evolutionary Control of Three-Phase Magnetic Resonance Wireless Power Transfer Chargers with Artificial Neural Network–Based State of Charge Estimation for Heavy-Duty Electric Vehicles

Oct 2026 · Electrica · Vol 26 · 0 citations · 33 references

TL;DR

The results obtained demonstrate the robustness and effectiveness of the proposed method for transferring wireless power to heavyduty vehicles despite misalignment between the coils and variation in the air gap, two frequent and disruptive phenomena in real-world situations.

Abstract

Wireless chargers for electric vehicles have recently attracted considerable attention from researchers and scientists, particularly due to their promising applications for high-power transfer, such as in heavy-duty vehicles, which are the backbone of transportation. This paper presents an innovative method for controlling a threephase magnetic resonance wireless power transfer charger using genetic algorithm optimization of parameters to ensure efficient wireless energy transfer. This control method, which operates exclusively on the primary side, regulates the battery current in the case of charging using the constant current-constant voltage method and also in the case of charging using the multi-step current method, which preserves the state of health of the battery. The state of charge (SOC) of the battery is estimated by neural networks, which ensure SOC estimation despite communication loss. The proposed control method is tested under several scenarios for a wireless power transmission of 20 kW with a resonance frequency of 85 kHz and an efficiency of 90.15%. The results obtained demonstrate the robustness and effectiveness of the proposed method for transferring wireless power to heavyduty vehicles despite misalignment between the coils and variation in the air gap, two frequent and disruptive phenomena in real-world situations.

Read PDF

Similar papers

Open access Oct 2026

MOPSO-Tuned Robust Model Predictive Control of Bidirectional Inductive Power Transfer Systems Under Coupling and Load Uncertainty: Coordinated Voltage and Frequency Support for Grid-Connected Electric Vehicle Charging

The rapid development of electric vehicles (EVs) creates a need for charging systems that provide convenience and energy efficiency while supporting the electric grid. One possible solution is Bidirectional Inductive Power Transfer (BIPT), which enables contact-less energy transfer between the EV battery and the electr...

Adel Elgammal · 0 citations
Conference Open access 2026

Status of Electromagnetic Induction Coupling Technology for Wireless Charging of Electric Vehicles and Compared inquiry of Compensation Topology Circuit

Wireless power transfer according toelectromagnetic induction coupling (EIC) is of considerable significance in shaping the trajectory of electric vehicle (EV) charging infrastructure, with the compensation network design having a direct impact on both power delivery efficiency and load response characteristics. This s...

Feng-Yi Yao · 0 citations
Open access Sep 2026

Analysis of Capacitive Wireless Power Transfer Using LCLC Compensation Network for Electric Vehicles

With the growing demand for fast, efficient, and misalignment-robust wireless charging of electric vehicles (EVs), capacitive wireless power transfer (CWPT) has gained attention as a promising alternative to inductive methods. This paper investigates CWPT systems for electric vehicle charging. To address the limitation...

Qing Dong, Pedram Asef, Shu-Chang Cai et al. · 0 citations
Open access Oct 2026

Design of Reactive Power Minimization Wireless Battery Charger Utilizing a Topology Automatic Reconstruction Strategy

The traditional battery charging process generally consists of a constant current (CC) phase followed by a constant voltage (CV) phase. However, existing CC–CV transition methods still face several challenges, such as the need for battery state monitoring, bilateral communication, or potential cross-coupling among mult...

Bing Cheng, Hao Qiu, Wen-Tao Shi et al. · 1 citation
Open access Sep 2026

Finite-Time Sliding Mode Control of an LCC-S-Based Wireless-Power-Transfer-Enabled Hybrid Energy-Storage System for Fuel Cell Electric Vehicles

The integration of wireless power transfer (WPT) technology with fuel cell hybrid electric vehicles (FCHEVs) offers a viable solution to enhance energy accessibility, increase flexibility, and improve driving sustainability. However, the coordinated operation of wireless charging systems, hybrid energy-storage systems...

Mudasir Wahab, Yan-Jin Hou, Laiq Khan et al. · 0 citations
Open access Sep 2026

Model-Free Predictive Control for Bidirectional Power Flow in Wireless EV Charging Systems with Coil Misalignment

Wireless Power Transfer (WPT) systems based on Dual Active Bridge (DAB) converters have gained significant attention for bidirectional electric vehicle charging due to their high efficiency, galvanic isolation, and controllable power flow. However, coil misalignment between transmitter and receiver represents a major p...

M. Álvarez-Duque, W. Gil-González, A. Escobar-Mejía · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.