Oct 2026· IEEE Photonics Journal· Vol 18, pp. 1502409-1502409· 0 citations· 19 references
Abstract
To address the susceptibility of single-photon avalanche diodes (SPADs) to false triggering under strong background illumination and the lack of flexibility in traditional macro-pixel readout architectures, this paper proposes an FPGA-based adaptive and reconfigurable macro-pixel SPAD array readout circuit. The design employs a modular, tileable architecture that enables flexible array scaling, complemented by a reconfigurable coincidence-detection threshold together with a feedback regulation mechanism. These features enable automatic optimization of the detection strategy according to the incident optical power, thus supporting both high-sensitivity and high-signal-to-noise ratio (SNR) operating modes. The circuit incorporates a 216-stage delay-line time-to-digital converter (TDC), achieving a time resolution of 25.11ps, with a typical power consumption of 1.2 W. Measurement results show that the differential nonlinearity (DNL) ranges from –0.89 to 0.77 LSB, and the integral nonlinearity (INL) ranges from –1.80 to 1.53 LSB. Based on Monte Carlo simulations and FPGA-level validation, the proposed readout architecture maintains stable macro-pixel signal-to-noise ratio and detection efficiency under varying background illumination. This work presents a scalable hardware architecture that enables adaptive readout for large-scale SPAD arrays, suitable for laser ranging and imaging under varying background conditions.
Digital silicon photomultipliers (dSiPM) are arrays of single photon avalanche diodes (SPADs) where each SPAD has its own electronic readout. To maximize the photodetection area, we developed a readout integrated circuit (ROIC) 3D-integrated to a custom-designed SPAD layer fabricated at Teledyne Dalsa (Bromont, Canada)...
O. Lepage, T. Rossignol, N. Roy et al.· Journal of Instrumentation· 1 citation
Active stoppers based on scintillating fibres provide fast signal formation, fine segmentation and compact geometry. On the other hand, their implementation requires a readout that can handle many silicon photomultiplier channels and a wide range of light intensities. We present a laboratory characterization of a resis...
K. Zagar, G. Košir, M. Vencelj et al.· Italian National Conference...· 0 citations
To meet the upgrade requirements for the Inner Tracking System (ITS) of the Multi-Purpose Detector (MPD) at the Nuclotron-based Ion Collider facility (NICA) for extremely high spatial resolution and low material budget, we present a monolithic active pixel sensor array chip, MIC6 V4, using GSMC 130 nm CMOS process. The...
S. Xiao, Le Xiao, Xiang-Ming Sun et al.· International Journal of Mod...· 0 citations
Accurate determination of the motor rotation angle is indispensable in engineering and industrial fields. Resolvers function as the primary sensing elements to detect the angular position, operating in tandem with a front-end read-out circuit to ensure precise measurement. Therefore, the front-end read-out interface is...
K. Angkeaw, Jirat Chimnoy, Fabian Khateb et al.· IEEE Transactions on Instrum...· 0 citations
A measured assessment of the practical benefits and limitations of in-pixel front-end amplification for low-noise and high-dynamic-range (HDR)-oriented CMOS image sensors is provided.
Peng-Fei Xu, I. Hafizh, G. Meynants· Journal of Instrumentation· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.