Skip to content
Open access

Parameter Tuning for Durable and Refined PMMA Filament 3D Printing

Sep 2026 · Journal of materials engineering and performance (Print) · 0 citations · 19 references

Abstract

Extrusion of materials (MEX) in the form of filament has gained ground to produce customized components in various domains. In particular, poly(methyl methacrylate) (PMMA) material has shown promising results for customized biomedical devices. This investigation presents a stochastic strategy designed to enhance interlayer bonding in PMMA prints. Printing temperature, speed, and infill density were tested for bonding quality within a narrower experimental window, following a literature study conducted over a wider experimental range. Optimizing these parameters enabled the identification of conditions that significantly improve flexural strength and surface finish. The findings demonstrate the potential for finely tuned 3D printing conditions to produce durable, ready-to-use PMMA parts directly from the 3D printer. Process optimization showed that 100% Di, 250 °C Nt, and 40 mm/s Ps constitute the optimal parameter set, achieving maximum flexural strength alongside minimum surface roughness, with Fl-sb exceeding 48 MPa and Ra maintained below 10 µm.

Read PDF

Similar papers

Open access Sep 2026

Investigation on Flexural and Compression Strength and Microstructures of Vacuum Assisted 3D Printed Samples

Additive manufacturing (AM) has advanced significantly over the last decade, enabling the creation of complex geometries with functional parts. However, integrating vacuum pressure into open-source Fused Deposition Modeling (FDM) 3D printers remains underexplored, particularly regarding its impact on the flexural and c...

Thavinnesh Kumar Rajendran, M. Shahrum, S. Maidin et al. · 0 citations
Conference

Mechanical Properties Analysis of 3D-Printed Polymers: Impact of Material Type, Layer Thickness, and Build Orientation

3D printing is a promising technology offering minimal production times, lower costs and high-quality resolution. It would be beneficial to use 3D printing approach for production purposes since this technology allows for object production with minimal steps comparing to the traditional manufacturing methods. Several s...

F. Aldawood · 0 citations
Sep 2026

Experimental and statistical evaluation of laser beam machining of additively manufactured polylactic acid/wood composites

Additive manufacturing (AM) via fused filament fabrication (FFF) has gained widespread adoption for fabricating polymer components. However, parts produced by FFF frequently suffer from relatively poor surface finish and limited dimensional accuracy. Therefore, the application of appropriate post-processing techniques...

Mohammad Khoran, Omid Mehrabi · 0 citations
Open access Sep 2026

Simultaneous Optimization of Manufacturing Variables for 3D-Printed PETG Prototypes Leveraging Taguchi-Coupled Grey Relational Approach

This study investigates the optimization of Fused Deposition Modeling (FDM) parameters for Polyethylene Terephthalate Glycol (PETG) a material widely utilized in clinical and biomedical applications due to its favorable combination of lightweight properties, durability, and versatility. By applying a Grey-Taguchi metho...

Abera Anebo, Temesgen Abebe, D. Sinha · 0 citations
Oct 2026

Mechanical performance and shape memory characteristics of 4D printed PCTG structures

Additive manufacturing (AM) enables the fabrication of complex, multifunctional structures, while integration with shape memory polymers (SMPs) extends this capability to 4D printing through time-dependent, stimulus-responsive behavior. However, commonly used SMPs like PLA are brittle at room temperature, limiting th...

Sezin Selamoglu, Ali Fallah · 0 citations
Open access Sep 2026

Influence of Processing Parameters on the Mechanical Properties of 3D Printed Borosilicate Particulate Reinforced Polymer Composites

Emerging composite materials are expanding the potential of additive manufacturing and enabling applications previously restricted by traditional manufacturing methods through their multi-phase nature and complex internal geometry. Additionally, these materials can be pyrolyzed to create dense metal, ceramic, and glass...

Lucian Alexander-Roy, Meelad Ranaiefar, M. Singh et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.