Sep 2026· Ambidextrous Journal of Innovation Efficiency and Technology in Organization· 0 citations
TL;DR
The developed prototype demonstrates the feasibility of real-time electrical parameter monitoring and preliminary disturbance indication for runway edge light models under laboratory testing conditions.
Abstract
Runway lighting is a critical facility that supports the safety and reliability of airport operations, particularly during nighttime operations and adverse weather conditions with limited visibility. This study aims to design and implement an Internet of Things (IoT)-based current and voltage monitoring system as an indicator of disturbances in a runway edge light prototype. The proposed system utilizes an ACS712 current sensor, a ZMPT101B voltage sensor, an ESP32 microcontroller, a 16x4 LCD display, and the Blynk platform. The monitored parameters include current and voltage, which are processed by the ESP32 and transmitted via a Wi-Fi network for real-time monitoring. The test results show that the prototype successfully measured voltage values ranging from 203 V to 220.5 V and current values ranging from 1.90 A to 2.03 A, with a monitoring success rate of 100%. The system successfully identified normal conditions, undervoltage, overcurrent, and electrical circuit interruption based on predefined thresholds of 209–231 V for normal voltage and 1.8–2.0 A for normal current. Data transmission to the Blynk dashboard achieved a 100% success rate with an average delay of 1.22 seconds. The developed prototype demonstrates the feasibility of real-time electrical parameter monitoring and preliminary disturbance indication for runway edge light models under laboratory testing conditions.
Industrial electric motors require continuous condition monitoring because developing electrical, thermal, and mechanical abnormalities can lead to unplanned shutdowns and equipment damage. This study developed and evaluated a multi-sensor Internet of Things system for real-time condition monitoring and fault classific...
Emina E. Etomi, Nneka M. Obi, D. Onyishi· International journal of re...· 0 citations
The validated platform provides a foundation for future LSTM-based predictive-maintenance research on three-phase induction motors and demonstrates consistent near-real-time monitoring, high HTTP transmission success, and complete sequence integrity within the validated database records.
Nandar Nandar, A. Fadlil, Tole Sutikno· Journal of Electrical Engine...· 0 citations
The complete gateway hardware cost is under USD 4, making the approach economically viable for retrofitting legacy industrial monitoring installations, and positioned as a retrofit enabler for medium-voltage feeders that supply sustainable transportation infrastructure such as electric-vehicle chargers and urban-rail s...
Indonesia's rising residential electricity consumption and the passive nature of conventional electrical terminals create risks of energy waste, overload, and fire hazards, since existing terminals offer no monitoring or remote-control capability. This research aimed to design and implement Smartura, an IoT-based smart...
Chika Hayya Sabillah· Journal of Applied Science,...· 0 citations
The development and validation of an IoT cloud-based portable Power Quality Monitoring (PQM) system for low-voltage three-phase and single-phase electrical distribution networks was presented and it was verified that no measurement records were lost during communication failure tests or power outages.
Brayan Daniel Vazquez-Gasca, R. Morales-Caporal, P. M. Quintero-Flores et al.· IEEE Access· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.