Skip to content
Conference Open access

Experimental and numerical study of precursor shaped charge performance

2026 · Zbornik radova · 0 citations · 5 references

Abstract

The shaped-charge effect remains one of the most effective mechanisms for defeating armored targets. Tandem shaped-charge warheads provide enhanced effectiveness against explosive reactive armor systems, where the precursor charge is used to initiate the reactive armor prior to the arrival of the main charge. The present study investigates the performance of a small-diameter precursor shaped-charge warhead with a charge diameter of 50 mm. A 60° conical copper liner with a thickness of 1 mm is accelerated by the detonation products of an explosive charge and subsequently transformed into a high-velocity jet. The experimental program included three explosive materials-TNT, RDX, and HMX-as well as variations in standoff distance. A high-strength alloy steel cylinder was used as the target. In parallel, a numerical model of jet formation and target penetration was developed using the commercial finite element software Abaqus/Explicit and a purely Eulerian formulation. Comparison of the experimental observations and numerical predictions demonstrated good agreement in terms of penetration depth and cavity geometry, while also providing insight into the underlying penetration mechanisms and the influence of key design parameters. The validated numerical model provides a reliable basis for further analysis and optimization of shaped-charge warhead performance.

Read PDF

Similar papers

Sep 2026

Precise and Efficient Damage to Engineering Structures Using Embowed Linear Explosively Formed Projectile

Upon detonation of the shaped charges, the liner exhibits fluid‐like behavior under the high detonation pressure on the order of 10 2 –10 3 GPa. It is rapidly collapsed by the detonation wave and converges toward the symmetry axis, ultimately forming a high‐speed penetrator. Linear‐Shaped Charges (LSCs), renown...

Shen-He Zhang, Zhi-Fan Zhang, Long-Kan Wang et al. · 0 citations
Open access Oct 2026

A Numerical Study on the High-Velocity Ballistic Performance of TPMS Sandwich Structures

Triply Periodic Minimal Surface (TPMS) structures have significant potential for lightweight ballistic armor. Unlike previous quasi-static or low-velocity studies, this research explicitly addresses the terminal ballistic regime and perforation morphology. It evaluates three Ti6Al4V TPMS sandwich cores (Diamond, Gyroid...

M. Nguyen, Ba-Anh Le · 0 citations
Oct 2026

A special design of composite armor with high velocity diverting capability against shaped charge warhead

Shaped-charge warheads constitute a distinctive, highly effective, and comparatively inexpensive class of munition, employed principally in rocket-propelled grenades (RPGs) and in a range of civil applications such as perforating rock formations in mining, oil-well perforation, and other geotechnical operations. The ar...

T. Baykara, V. Günay, A. Demirural · 0 citations
Open access Oct 2026

Research on optimization of radial uncoupled charge parameters based on the mechanical characteristics of step-type partitioning

To investigate the influence mechanism of a radial uncoupled charge structure using mixed emulsion explosives on the generation rate of blasting fines, a typical granite quarry was selected as the case study. A systematic investigation was conducted through the integration of theoretical analysis, transparent tube phys...

Tao Wang, Gao-Feng Ren, Zhen Wang et al. · 0 citations
Sep 2026

Secondary damage of RC slabs under contact explosions of array charges: Mechanism and failure model

Array charges significantly enhance the damage efficiency against RC slabs under equal‐mass conditions, which is primarily attributed to secondary damage induced by the collision and coupling of detonation products in inter‐charge gaps. Based on mass and momentum conservation and the incompressibility assumption of...

Zhuo-Yu Qi, Xu-Dong Zu, Xiao-Jie Li · 0 citations
Conference Open access Sep 2026

Effects of composite sandwiches on jet resistance and sympathetic detonation prevention of reactive armor

Explosive Reactive Armor (ERA) serves as the core protection for modern main battle tanks to enhance their survivability. With the increasing requirements for armor to withstand multiple strikes in combat environments, double-layer ERA has been more widely applied to armored vehicles. However, double-layer ERA faces se...

Zi-Teng Niu, Xiao-Qing Wang, Guo-Ping Li et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.