Skip to content
Open access

Research on optimization of radial uncoupled charge parameters based on the mechanical characteristics of step-type partitioning

Oct 2026 · Scientific Reports · Vol 16 · 0 citations · 16 references

Abstract

To investigate the influence mechanism of a radial uncoupled charge structure using mixed emulsion explosives on the generation rate of blasting fines, a typical granite quarry was selected as the case study. A systematic investigation was conducted through the integration of theoretical analysis, transparent tube physical simulations, and in-site industrial trials. First, a comparative analysis between coupled and uncoupled charge configurations was performed, demonstrating that the radially uncoupled design facilitates attenuation of peak detonation stress and promotes more uniform energy dissipation through the annular air gap. Second, variable-diameter radial decoupled spaced sinking charge simulations were conducted to optimize both spacer placement and isolation measures. Finally, field experiments were implemented on a weakly weathered (+ 30 m) and a moderately weathered (+ 45 m) granite bench within the same mine, where varying decoupling coefficient schemes were applied to the upper, middle, and lower sections of bench-zoned areas and compared with traditional rock-slag spacers and continuous charging. The findings indicate that in weakly to moderately weathered granite, the proposed radially uncoupled configuration-incorporating a 125 mm bottom charge and 110 mm spacers in the middle and upper spacers-reduces specific explosive consumption by over 16%, produces a more uniform fragment size distribution, lowers fines generation, and yields a moderately loose muckpile that facilitates subsequent excavation and loading. This charge structure effectively controls the pulverization rate in granite blasting, thereby providing a practical technical reference for similar granite quarry applications.

Read PDF

Similar papers

2026

Flow field optimization and inclusion behavior in a 70-ton T-type eight-strand continuous casting tundish

As a critical unit in metallurgical processing, the tundish plays a vital role in ensuring smooth continuous casting operation, facilitating the flotation and removal of non-metallic inclusions, and enhancing the cleanliness and homogeneity of molten steel. This study addresses the key issues of flow-field non-uniformi...

Xin-Zhe Lu, Diao Wang, Yu-Han Ge et al. · 0 citations
Open access Nov 2026

Influence Of Structural Parameters of Planar Adjustable Pintle Injector on Flow and Mixing Characteristics

The pintle injector is widely employed in propulsion systems owing to its simplicity and high performance. While fixed-geometry designs have been extensively investigated, the impact of structural parameters on adjustable configurations remains unclear. This study conducted experimental and numerical investigations of...

Shao-Lei Luan, J.-Q. Zhang, J.-P. Wu et al. · 0 citations
Conference Oct 2026

Study on fluid-structure interaction characteristics of uncompensated preheating for long-distance heating directly buried pipes

The uncompensated electric preheating technology, which establishes prestress through preheating to offset partial thermal stress, eliminates the need for compensators, reduces costs, and improves efficiency, serving as a key technology for buried heating pipelines. This study focuses on this technology, employing a co...

Chun-Lin Xie, Cheng-Lei Yin, Jie-Ling Liu et al. · 0 citations
Conference Open access 2026

Experimental and numerical study of precursor shaped charge performance

The shaped-charge effect remains one of the most effective mechanisms for defeating armored targets. Tandem shaped-charge warheads provide enhanced effectiveness against explosive reactive armor systems, where the precursor charge is used to initiate the reactive armor prior to the arrival of the main charge. The prese...

P. Elek, B. Jovanović, Dragana Jelić et al. · 0 citations
Oct 2026

Experimental and numerical investigation of erosion behavior in 90° elbows of heat-exchanger tubes

Erosion in elbows is a critical factor affecting the safety and service life of heat-exchange pipelines. To elucidate the erosion patterns of 90° elbows in heat-exchanger tubes under solid–liquid two-phase flow, this study conducts a systematic investigation combining experimental measurements with numerical simulation...

Lu-Yun Li, Tian-Yu Wu, Yan-Peng Qu et al. · 0 citations
Open access Oct 2026

Design of an H2–O2 Standing Oblique Detonation Test Bench and Study of Recirculation-Zone Influence on Shock Structure

Building on the previous theoretical parametrisation of oblique detonation wave (ODW) stability limits for hydrogen–oxygen mixtures, the present work advances the investigation by combining CFD analysis with the complete mechanical design of a planar ODW test bench. While the earlier study established feasible inflow c...

B. Navligu, R. Nicoara, Sîrbu Theodor-Mihnea et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.