Skip to content
Open access

Multi-Parametric Optimization of Stone Gravity Retaining Walls Under Static and Seismic Loading

Oct 2026 · Buildings · Vol 16, pp. 4071 · 0 citations · 37 references

Abstract

This paper presents a multi-parametric optimization framework for trapezoidal stone gravity retaining walls subjected to static and pseudo-static seismic loading. The wall is treated as a no-tension gravity structure, and the base width, top width, and embedment depth are optimized by minimizing the wall self-weight. The objective function is constrained by overturning, eccentricity, sliding, and bearing-capacity requirements, as well as by lower geometric bounds. The analytical formulation is implemented directly in an optimization model and includes Coulomb-type active earth pressure, Mononobe–Okabe seismic pressure, mobilized passive resistance, wall inertia, and bearing capacity. Two foundation scenarios are considered: Scenario A, with identical foundation and retained soil properties, and Scenario B, with competent foundation soil. The parameter grid combines five retained-soil heights, six soil friction angles, four passive-resistance mobilization factors and four seismic accelerations, evaluated for two foundation scenarios and three loading branches (static and two opposite-sign vertical seismic branches), producing 2160 optimized designs. The results reveal distinct mechanically controlled design regimes. In Scenario A, low friction angles are governed mainly by bearing capacity and sliding, whereas eccentricity dominates as friction increases. In Scenario B, sliding and bearing cease to govern, and the optimum is controlled predominantly by eccentricity, with overturning appearing in a limited low-wall domain. The positive and negative vertical seismic branches produce different design demands, with the negative branch becoming progressively more critical as seismic intensity increases. The optimized base-width-to-height ratio further shows that weak foundation conditions can lead to markedly more massive wall geometries, whereas stronger foundation soil enables substantially more compact solutions.

Read PDF

Similar papers

Open access 2026

Seismic response assessment of RC frame buildings with masonry infill openings and soft story irregularity under dynamic soil–structure interaction

Masonry infill walls are widely used in reinforced concrete (RC) buildings, but their seismic behavior is often studied using fixed-base models without fully considering soil–structure interaction. This study investigates the seismic response of a ten-story, one-bay RC frame with 0%, 30%, and 50% infill openings, with...

B. R. Shilpa, G. Narayana, B. Narendra · 0 citations
Open access 2026

Analysis of Seismic Demand in Different Structural Members by Considering Various Earthquake Zones

This paper presents a comparative analytical investigation of seismic demand in reinforced-concrete (RC) structural members located in the four Indian earthquake zones (II, III, IV and V). A regular twelve-storey, four-bay special moment-resisting RC frame was used as a reference structure. Seismic action was evaluated...

Rina Kumari Vikash Kumar · 0 citations
Open access Oct 2026

Optimization of Shear Wall Placement to Improve Seismic Performance of High-Rise Buildings Using Pushover Analysis

High-rise reinforced concrete buildings are susceptible to seismic forces due to their slenderness and flexibility, necessitating effective lateral load-resisting systems. This study investigates the optimal placement of shear walls to enhance seismic performance. A seven-story symmetrical building model was developed...

S. Hasibuan, H. Prayuda, A. Alisibramulisi et al. · 0 citations
Oct 2026

Pseudo-Dynamic Evaluation of Seismic Earth Pressures on Cantilever Retaining Walls with Consideration of Heel Length Effects

The evaluation of seismic active earth pressures on cantilever retaining walls remains challenging due to the spatial and temporal variation of earthquake-induced accelerations and the influence of wall geometry, particularly heel length. This study develops a generalized pseudo-dynamic analytical model that accounts f...

Ayman Gharbi, F. El Khannoussi, B. El Yamouni et al. · 0 citations
Open access Sep 2026

A Comparative Study on the Seismic Behaviour of Square and Circular Water Tank Considering Soil-Structure Interaction

The seismic performance of elevated water tanks is a major concern due to the large mass of stored water at an elevated level and the flexibility of the supporting staging system. Unlike conventional buildings, the dynamic response of elevated water tanks under seismic loading is complex, depending on tank geometry, st...

K. S. Jayadeep, M. Ramya · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.