Skip to content
Review Open access

Carbon‐Based Electrodes for Sodium‐Ion Batteries: Material Design, Electrochemical Performance, and Challenges

Sep 2026 · Carbon and Hydrogen · 0 citations · 136 references

Abstract

Substantial energy storage systems are among the contemporary demands to fulfil the rising production of clean energy resources. Constant research is being done focusing on the advancement in energy storage technology to make it efficient, economically feasible, and environmentally friendly. LIBs were the most often employed energy storage systems, but they suffer from hazardous environmental impact and costly, insufficient precursor material. SIBs have proven to be the finest substitute due to their cost‐effectiveness and vast material sources. But still widespread application of SIBs is hindered by the limitations of the electrode materials. The poor electrochemical performance, because of the wide ionic radius, has put a limit on the selection of efficient electrode materials. Among various electrode materials, carbon‐based electrodes are of strong interest due to their chemical stability, larger active area, and higher electrical conductivity. Therefore, this review focuses on graphite, graphene, CNTs, and their composites as carbon‐based electrode materials for SIBs. Hard carbon, an important practical carbon anode for SIBs, is briefly discussed for comparison. The influence of different material design strategies on the electrochemical performance of these electrodes is critically discussed in tabular comparison of their performance. A detailed analysis of the shortcomings of these materials alongside current research progress and their eco‐economic feasibility is described. Finally, future strategies are suggested to further enhance the large‐scale practical application of carbon‐based electrodes.

Read PDF

Similar papers

Review Open access Oct 2026

Metalized Carbon Fiber Electrodes for High‐Performance Aqueous Redox Flow Batteries: The Dominance of Bismuth

Electrochemical energy storage has become a key component for balancing energy supply and demand in the 21st century. Redox flow batteries (RFBs) are distinguished by their high safety, flexible control over power and energy, and long cycle life. While advancements in RFBs continue, including improvements from single...

G. Srividhya, Megha Bala, John Bell et al. · 0 citations
Open access Sep 2026

Aqueous Processing of High‐Loading LNMO Electrodes for High‐Energy Lithium Batteries

Transitioning toward more sustainable materials and production methods has been one of the most critical points for expanding the lithium‐ion battery (LIB) market in the last decade. At the same time, energy storage applications require high energy density and high power with demanding performance targets such as wide...

B. Boz, Lukas Neidhart, Susan Montes et al. · 0 citations
Review Open access Sep 2026

Overview of Research Progress and Development of Cathode Materials for Aqueous Na‐Ion Batteries

Aqueous sodium‐ion batteries (ASIBs) have now been viewed as the promising energy storage technique for the grid application due to their intrinsic safety and cost‐effectiveness. However, their energy density and cycling stability are still unsatisfactory accompanied by the narrow electrochemical stability window of...

Zhi-Wei Shi, Hong-Min Chen, Hong-Yu Xia et al. · 0 citations
Review Open access Sep 2026

Recent Advances of Nanocomposite Electrode Materials for Lithium-Ion and Sodium-Ion Batteries

Lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) are the two most significant battery technologies for electric vehicles (EVs) and large-scale energy storage systems; however, conventional single-electrode materials exhibit large volume changes, limited electronic conductivity, and sluggish ion diffusion ki...

Yi-Cheng Zhu · 0 citations
Review Open access Nov 2026

Modification Strategies for Hard-Carbon-Based Anode Materials in Sodium-Ion Batteries

Sodium-ion batteries offer abundant resources, low cost, and high safety, making them promising for large-scale energy storage. Hard carbon, a key anode material, enables Na+ storage through its disordered structure, enlarged interlayer spacing, and abundant defects and pores. However, these features also cause electro...

Zhi-You Xu · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.