This work shows that weather awareness is an attack surface: an adversary who spoofs only the rainfall input dictates the victim's carrier frequency, and through it its communication range, without transmitting on the channel.
Abstract
Connected vehicles use millimeter-wave (mmWave) sidelinks for the data rates cooperative driving demands, and emerging designs select the carrier band from sensed rainfall. We show that this weather awareness is an attack surface: an adversary who spoofs only the rainfall input dictates the victim's carrier frequency, and through it its communication range, without transmitting on the channel. We evaluate the attack in MilliCar, an ns-3 module that runs the selected band as the real 3GPP NR V2X carrier with per-band propagation, beamforming, and blockage. Forcing the band up to 73 GHz holds an eight-vehicle platoon's reliable range at 38 m while the honest baseline doubles it to 82 m; forcing it down to 5 GHz sustains 97% long-range reception but collapses the transport block to a third and quadruples long-range latency to 12.5 ms. We then implement the defense the mechanism implies. Rain loss grows linearly with distance while path loss grows logarithmically, so a receiver that tests measured SINR against the attenuation its reported weather predicts flags force-up with 98% probability within 1.5 s at a 1% false-alarm rate, and re-selection then restores long-range reception from 60% to 75%. The same test is structurally blind to force-down, because the 5 GHz fallback is nearly rain-immune. An advecting rain cell that swings the local rate from 15 to 81 mm/h leaves every result unchanged. Weather-aware band selection therefore requires an authenticated meteorological input; physical cross-checking covers one half of the threat.
This paper discusses how using realistic cluster-delayed-line (CDL) channel modelling can improve the performance of RIS-assisted millimeter-wave communication links and shows that RIS-assisted beamforming greatly improves communication performance from direct established links.
K. Swamy, Suman Turpati, Sivasubramanyam Medasani et al.· PLoS ONE· 0 citations
Wireless systems operating in shared spectrum are easily influenced by heterogeneous devices, external emitters, and operating contexts, which may lead to lower link quality, throughput loss, channel switching, and even navigation anomalies. This paper discusses three representative interference settings: co-channel in...
Millimeter-wave (mmWave) networks suffer from two practical limitations: blockage often leaves clients in non-line-of-sight (NLoS) conditions, and client radios support much smaller instantaneous bandwidth than a base station. We demonstrate Mirage, a custom space-time-coded reconfigurable intelligent surface (RIS) tha...
Aadesh Madnaik, Karthikeyan Sundaresan· Proceedings of the 32nd Annu...· 0 citations
This paper addresses long-range sensing in bistatic low-Earth-orbit integrated sensing and communication (LEO-ISAC). Conventional OFDM sensing fails in LEO-ISAC because millisecond-scale propagation delays destroy the transmitter--receiver symbol alignment and, with multiple targets, make the receive window longer than...
Y. Geng, Xun-Zhang Fan, Chen-Feng Xu et al.· 0 citations
Commercial millimetre-wave (mmWave) Wi-Fi platforms based on IEEE 802.11ad/ay have demonstrated sensing capabilities, but they provide limited visibility into the packet-level measurements and synchronisation mechanisms that determine temporal coherence. We present a programmable 60~GHz IEEE 802.11ad testbed that expos...
Raquel Marina Noguera Oishi, Hao-Qiu Xiong, Hany Assasa et al.· 0 citations
Millimeter-wave (mmWave) communication is a newly-emerging technique for terrestrial 5G wireless systems. By shifting to the mmWave frequency band, a much larger bandwidth can be achieved. The resulting high-frequency transmission loss can be mitigated with the aid of a large-scale array (LSA) and angular processing. A...
Yu-Jie Wang, Yan-Bin He, Qun-Fei Zhang et al.· IEEE Transactions on Communi...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.