Sep 2026· 2026 Energy Conversion Congress & Expo Europe (ECCE Europe)· pp. 1-6· 0 citations· 17 references
Abstract
Capacitor selection in power electronics dictates both electrical performance and system lifetime. Convention suggests that an extended component lifetime results in a more sustainable solution, as it reduces the number of components that need to be replaced. However, empirical evidence using standardised metrics is missing. This study employs Life Cycle Assessment (LCA) to evaluate whether increased capacitor lifetime improves environmental sustainability in power converter systems. To ensure a controlled comparison, capacitor values for ceramic, electrolytic, film, and tantalum technologies were selected to maintain nearly identical electrical performance within a DC-DC buck converter. Electrical parameters were characterised using PLECS simulations, while lifetime data were synthesised from the literature. The global warming potential (GWP) was quantified with an LCA using the ecoinvent database and literature. Results indicate that ceramic and metallised film capacitors outperform electrolytic and tantalum variants in lifetime, as expected. The conducted LCA proves that the capacitor lifetime and GWP/lifetime metric do not always follow the expected pattern, and this depends on the capacitance and function. For example, the $\mathbf{4 7 0} \mu \mathbf{F}$ film capacitor has the longest lifetime, but also the highest GWP/lifetime in the study. This research provides for the first time empirical evidence that, in the context of power electronics, capacitor longevity and environmental sustainability are not always correlated.
This paper proposes a framework to simultaneously evaluate the performance, reliability, and environmental impact of grid-tied photovoltaic (PV) inverters. The methodology integrates electro-thermal modeling, component sizing, and mission-profile-based lifetime estimation to quantify operational stress and hardware rep...
Ning Wang, F. Sporchia, M. Pizzol et al.· 2026 Energy Conversion Congr...· 0 citations
This paper addresses the challenge of ensuring uniform AC and DC loads on individual electrolytic capacitors during accelerated aging tests, despite inherent initial variations in electrical parameters and anticipated drift due to degradation. The primary issue arises from the dynamic impedance changes of the capacitor...
Mariam Elsotohy, Felix Zeyss, Marcel Sippel et al.· 2026 Energy Conversion Congr...· 0 citations
Background: DC-link capacitors play a central role in buffering energy, limiting voltage ripple and supporting reliable operation of power electronic converters.
Aim: To organise the reliability and condition-monitoring problem for DC-link capacitors used in power electronic converters.
Study Design: A focused narrativ...
Neha Singh, Deep Sehgal· Asian journal of current res...· 0 citations
Wide bandgap (WBG) devices are expected to bring higher efficiency and power density in power converters compared to silicon devices. The introduction of WBG devices often leads to significant changes in a converter optimization and trade-offs such as the selection of the optimal switching frequency, leading to the sel...
Charley Lanneluc, Suzanne Guillou, B. Sarrazin et al.· 2026 Energy Conversion Congr...· 0 citations
Reliable power capability estimation is essential for battery management systems (BMSs), yet aging progressively alters the admissible charge and discharge limits of lithium-ion cells. This paper presents an aging-aware framework combining the experimental identification of a first-order one-RC electrical equivalent ci...
G. Lutzemberger, Massimo Ceraolo, F. Quilici et al.· Energies· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.