Skip to content
Review Open access

Specification-driven feasibility and techno-economic assessment of recycling and valorization of HTV silicone rubber manufacturing scrap from composite insulator production

Nov 2026 · Future Engineering Research · Vol 1, pp. 1-9 · 0 citations

Abstract

Composite silicone insulators are rapidly displacing ceramic and glass units in high-voltage transmission, and their manufacture generates substantial cured high-temperature-vulcanized (HTV) silicone rubber scrap that is chemically inert and non-degradable. This study presents a specification-driven feasibility and techno-economic assessment of recycling and valorizing 24 t/year (2 t/month) of cured HTV scrap (grade MPC D010707) generated in the production of 170 A/B, 170 C and 420 A/B composite insulators. Using the manufacturer quality specification together with the stoichiometry of aluminum trihydroxide (ATH) dehydration, a compositional model of approximately 55 wt% ATH, 5 wt% reinforcing silica, and 40 wt% polydimethylsiloxane (PDMS) is inferred without new laboratory characterization. Three valorization routes are modeled: mechanical recycling by ambient and cryogenic grinding with reincorporation into virgin compound; oxidative pyrolysis to recover a silica-rich inorganic residue; and high-temperature mullite synthesis. A linear property-degradation model, anchored to a recent peer-reviewed high-consistency rubber recyclate dataset, shows that mechanical property loss is not the binding constraint. Instead, the particle-size specification of 10 µm median diameter and the tracking and erosion requirement of class 1A4.5 restrict reincorporation into insulator housings to roughly 10 to 15 parts per hundred rubber (phr) until qualified by testing, whereas downcycled products tolerate up to 60 phr. Stoichiometric mass balances give a 73% inorganic yield for oxidative pyrolysis, of which 375 kg/ton is a high-value silica fraction, and 500 kg/ton mullite for the ceramic route. Techno-economic modeling identifies ambient mechanical recycling as the most attractive first investment, with a capital expenditure near USD 21,000 and a payback below one year, contingent on internal absorption capacity, with recovered-silica pyrolysis as a strategic second phase. The work is presented explicitly as a modeling and techno-economic feasibility study based on manufacturer specification data and literature-derived property models.

Read PDF

Similar papers

Open access Oct 2026

Low-temperature catalytic chemical recycling of WTB-GFRP waste for glass fiber recovery and reuse

The growing disposal of wind turbine blades composed of glass fiber-reinforced polymer (GFRP) poses a major recycling challenge. In this study, we present a low-temperature catalytic chemical recycling method on GFRP blade waste for glass fiber recovery and evaluation of the mechanical performance of mortar reinforce...

H. Mekonnen, Su Qian, De-Xiu Chen et al. · 0 citations
Review Oct 2026

Technologies for producing cryogenic steel: from melting to heat treatment

The article presents a systematic review of modern technological processes for the production of cryogenic steels – specialized metallic materials that retain high impact toughness and ductility at ultra-low temperatures down to –269 °C. These alloys are critically important for the construction of storage tanks, trans...

G. E. Kurdyumov, A. M. Gladkikh, A. M. Pan'kov · 0 citations
Open access Sep 2026

Development of a Universal Thermosetting Putty for High-Performance Bicycle Frames: An Integrated Materials Engineering and Process Optimization Approach

The rapid expansion of the European e-bike market has increased demand for light-weight 6061 aluminum frames with premium cosmetic finishes, highlighting the need for thermally stable surface-leveling materials compatible with high-throughput powder coating. This study aims to develop a universal (the term “universal”...

A. A. Fonseca, Rúben F. Santos, C. Fonseca et al. · 0 citations
Open access Sep 2026

From beverage waste to electrical withstand: crystal-phase-controlled recycled alumina nanofillers for surface charge regulation in HVDC epoxy spacers

Epoxy spacers in gas-insulated substations (GIS) and transmission lines (GITL) accumulate surface charge under HVDC stress, distorting the electric field and lowering flashover voltage. Here, γ-rich alumina and α-Al2O3 nanofillers were synthesized from recycled aluminum beverage cans through acid dissolution, carbonate...

Mahmoud Ezzat, M. Ramadan, Musa A. Said et al. · 0 citations
Open access Sep 2026

Pilot-scale production and characterization of liquid fuel from mixed non-recyclable plastics for potential steam-generation applications

Post-sorting non-recyclable plastic residues pose significant management challenges due to the limitations of mechanical recycling. This study demonstrates a novel, direct vacuum-assisted pilot-scale batch pyrolysis of mixed plastic rejects dominated by polypropylene (PP, ≥45 wt%), low-density polyethylene (LDPE, ≥45 w...

Kanokwan Panmak, Yuvarat Ngernyen, Supattra Budsaereechai · 0 citations
Open access Oct 2026

Fused Granulate Fabrication of Virgin and Reprocessed PLA/Silicon Dioxide Nanocomposites: Processing, Mechanical Integrity, and Soil Microbial Respiration Response

This study evaluates processing via fused granulate fabrication (FGF) of nanocomposites based on virgin polylactic acid (PLA) and thermomechanically reprocessed polylactic acid (rPLA), incorporated with 0 wt%, 5 wt%, and 10 wt% of silicon dioxide (SiO2) nanoparticles. Rheological analysis revealed that rPLA exhibited a...

Saltanat Bergaliyeva, I. Romero-Ocaña, Alessandro Innocenti et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.