Skip to content
Open access

Physicochemical characterization and solidification kinetics of modified Al–Cu–(Ce)-based gas-atomized powders for PBF-LB

Sep 2026 · Journal of Materials Research · Vol 41, pp. 3036 - 3049 · 0 citations · 62 references

Abstract

Gas atomization is widely used to produce metal powders for Laser Powder Bed Fusion (PBF-LB). The alloy composition and powder characteristics strongly influence processability; hence, analyzing the raw material is essential. This study investigates the physicochemical, microstructural, and solidification features of two Al–Cu–(Ce) gas-atomized powders, AA2017-0Ce and AA2017-3Ce. Optical and scanning electron microscopy, synchrotron X-ray diffraction, and differential scanning calorimetry were applied to assess solidification kinetics. Density, flowability, contact angle, Hausner ratio, and loss on drying (LOD) were also measured to evaluate PBF-LB processability. Both powders (20–63 µm) showed high sphericity with some agglomerates and satellites. Cerium addition refined the microstructure, forming dendrites surrounded by Al + Al3CeCu + Al8CeCu4. LOD, contact angle, and Hausner ratio indicated that AA2017-3Ce exhibits lower moisture uptake and higher flowability than AA2017-0Ce, demonstrating improved processability for PBF-LB.

Read PDF

Similar papers

Open access Oct 2026

Influence of Chemical Composition and Water Quenching on the Phase Constitution, Microstructure and Dry-Sliding Wear of Zr-10Nb-xMo (x = 0, 2 and 4 wt.%) Alloys

Zirconium-based alloys are considered promising candidates for biomedical applications due to their favorable mechanical properties and corrosion resistance. In this study, Zr-10Nb-XMo alloys (X = 0; 2; and 4 wt.%) were fabricated using a combination of powder metallurgy and arc melting, followed by water quenching, in...

J. Zając, I. Matuła, M. Nabiałek et al. · 0 citations
Open access Oct 2026

Effect of Ti and B4C Inoculation on the Microstructure and Mechanical Properties of Powder Bed Fusion Laser Beam Processed Al–Cu–Mg Alloy: Role of Process Parameters and Heat Treatment

Aluminum alloys with high strength-to-weight ratios are attractive for demanding aerospace and automotive applications. However, processing high-strength alloys, particularly 2xxx, 6xxx, and 7xxx series, by laser powder bed fusion (PBF-LB/M) remains challenging due to their high cracking susceptibility. To overcome the...

Raúl Gómez, F. Garciandia, M. San Sebastian et al. · 0 citations
Oct 2026

Surface Functionalization Of Al-Ti-Mg Powders With Boron Nanoparticles To Enable In-Situ TiB2 Formation During Laser Powder Bed Fusion

This study investigates a new powder surface functionalization approach to promote in-situ TiB2 formation during Laser Powder Bed Fusion of an Al-Ti-Mg alloy. The powder surface was decorated with 0.5wt.% boron nanoparticles through a fluidized-bed process, eliminating the need for ex-situ TiB2 additions. EBSD results...

G. Lupi, N. Sandoval, E. Lui et al. · 0 citations
Open access Oct 2026

Ambient-atmosphere ultrasonic atomization of low-melting-point wood’s alloy powders: process optimization, atomization mechanism, and solderability

Low-melting-point alloy powders are crucial for temperature-sensitive electronic packaging. However, preparing quaternary Wood’s alloy powders containing volatile elements (Pb, Cd) via traditional atomization often causes compositional deviation and oxidation. Herein, 13.3Sn–50Bi–26.7Pb–10Cd (wt%) Wood’s alloy powders...

Ding-Ying Ren, Hao-Di Li, Xiao-Feng Yang et al. · 0 citations
Oct 2026

Integrated Alloy Design And Additive Manufacturing Of Low-Density Fe-Mn-Al-Ni-Cr-C Steel: Gas Atomization, Laser Directed Energy Deposition, And Microstructure-Property Relationships

This study introduces a new low-density steel (LDS) with an austenitic matrix strengthened by a stable, finely dispersed B2 intermetallic phase to optimize strength and toughness. The alloy was produced through vacuum induction melting and casting, followed by gas atomization to create spherical powders suitable for ad...

Mohammed Ali, Ahmed W. Abdelghany, Tuomas Jokiaho et al. · 0 citations
Open access Nov 2026

Effect of hydroxyapatite and yttria-stabilized zirconia nano-powders on surface integrity of Ti-6Al-4V in powder-mixed electrical discharge machining with multi-response optimization

This study investigated the influence of nano-powder type on the surface integrity of Ti-6Al-4V titanium alloy during powder-mixed electrical discharge machining (PMEDM). Three nano-powder conditions, namely hydroxyapatite (HA), yttria-stabilized zirconia (YSZ), and a mixed powder (50 wt.% HA + 50 wt.% YSZ), were dispe...

S. Shawi, Waqass S. Khudhir, A. M. Mustafa · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.