Skip to content
Open access

Compressive behavior and energy absorption of SLM-fabricated diamond-TPMS tube reinforced with bionic spider-web ribs

Oct 2026 · Proceedings of the Institution of mechanical engineers. Part L, journal of materials · 0 citations · 45 references

Abstract

Aluminum alloy thin-walled tubes are widely used in lightweight energy-absorbing structures owing to their high specific strength and crashworthiness. However, Diamond-type triply periodic minimal surface (TPMS) tubes may exhibit unstable penetrating 45° shear band deformation under axial compression. To mitigate this instability, a bionic spider-web rib-reinforced Diamond-TPMS tube (D-BCT) is proposed based on spatial–structural partitioning, dividing the annular region into an inner rib-reinforced region and an outer Diamond-TPMS region. Three specimens of each structure were fabricated from AlSi10Mg alloy by selective laser melting and tested under quasi-static axial compression. Within a common 0–15 mm evaluation displacement, the D-BCT achieved a mean specific energy absorption (SEA) of 38.74 J/g, approximately 9.9% higher than that of the conventional Diamond-TPMS tube (D-CT), while reducing the mean peak crushing force by approximately 30.7% and increasing the mean crushing force efficiency (CFE) from 64.66% to 74.92%. Compared with D-CT, D-BCT exhibited progressive crushing and buckling rather than a penetrating shear band, together with a more stable plateau response. These results suggest that spatial–structural partitioning is a promising approach for improving the quasi-static crushing stability of Diamond-TPMS tubes.

Read PDF

Similar papers

Open access Sep 2026

Structure–Property Relationships and Energy Absorption of FFF-Manufactured PETG Honeycomb-Type Structures for Automotive Applications

This study explores the quasi-static and dynamic responses of irregular, honeycomb-like topologies made from glycol polyethylene terephthalate (PETG) with various sparse infill densities, using fused filament fabrication (FFF) manufacturing technology. Both tensile and flexural tests revealed a linear increase in Young...

B. Nituleasa, C. Cerbu, H. Teodorescu-Draghicescu et al. · 0 citations
Oct 2026

Cyclic compression behavior, energy absorption and dissipation efficiency of TPU-based BCC and FCC lattice structures: An experimental and statistical modeling study

Thermoplastic polyurethane (TPU) lattice structures manufactured using fused filament fabrication (FFF) are promising for lightweight and energy-absorbing applications. The current work investigates the cyclic compressive response of body-centered cubic (BCC) and face-centered cubic (FCC) TPU lattices through varying c...

K. Gammoudi, Mariem Lajnef, Mabrouk Mosbahi et al. · 0 citations
Open access Sep 2026

Effects of Node Fillet Radius on Compressive Properties and Energy Absorption of FDM-Fabricated PETG Auxetic Honeycombs

Node fillet radius has a pronounced effect on the compressive performance of fused deposition modeling (FDM)-printed polymer honeycombs, yet quantitative design guidelines for PETG auxetic structures remain scarce. The effects of gradient node fillet radii (R0–R7 mm) on the load-bearing capacity, deformation mechanisms...

Xin-Ke Kuang, Zhang-Yong Hu, Rui-Yong Duan et al. · 0 citations
Sep 2026

Geometrically tailored 3D-printed HCC-PW lattice structures for deformation-regulated energy absorption under compression

The crushing performance of 3D-printed thin-walled lattices depends on the coordination between load transfer and structural deformation. This study investigates cell-wall bending, global twist, and their combination in polylactic acid (PLA) hollow cylindrical cross-plate wall (HCC-PW) lattice structures. Eight configu...

Shi-Hao-Na Jiang, Hai-Bo Liu, Xin Zhao et al. · 0 citations
Open access Nov 2026

Mechanical and ballistic performance of multilayer aramid laminates with nanofiller-reinforced HDPE/LDPE films

The increasing demand for lightweight and efficient ballistic protection systems has motivated polymer-based composites combining high impact resistance. In this study, nanostructured high-density polyethylene (HDPE) and low-density polyethylene (LDPE) films containing cellulose nanofibers (CNF), graphene nanoplatelets...

Danieli Dallé, Lídia Kunz Lazzari, C. Borsoi et al. · 0 citations
Open access Oct 2026

Experimental Investigation of Constituent Materials for Multilayered Impact Resistant Panels: Fiber-Reinforced Ceramic, Shape Memory Alloy, and  Titanium Alloy Lattice Structures

This experimental study investigates the mechanical performance and energy absorption characteristics of materials for a newly developed multilayered impact-resistant panel. The proposed lightweight structure combines fiber-reinforced ceramic (FRC), nickel-titanium shape memory alloy (SMA), and additively manufactured...

Muhammad Abid, Haris Khalid, H. Wajid et al. · 0 citations

We use cookies to run the site and, with your consent, for analytics and to show ads. See our Cookie Policy.