Insulated-gate bipolar transistor (IGBT) modules exhibit thermal behavior governed by interacting mechanisms spanning carrier transport, chip-scale diffusion, multilayer heat spreading, coolant convection, and thermomechanical response. This study presents an energy-consistent computational framework whose novelty lies not in the individual solvers, but in the explicit cross-scale energy interfaces, multirate synchronization, and observation operators that distinguish local-maximum, area-averaged, current-weighted, and sensor-related junction temperatures. Published first-principles and transport data for bulk silicon are used as reference-calibrated priors; the calculations implemented here comprise terminal-loss evaluation, prescribed energy-normalized spatial sources, analytical and two-dimensional diffusion reconstructions, three-dimensional finite-element thermal analysis, and a reduced-order Cauer network. For an 80 μm silicon chip at 400 K, the Fourier diffusion time is 0.12 ms, whereas the convention δT = 2√(αt) reaches the chip thickness at 0.030 ms; these values represent different diffusion criteria. In an illustrative boundary-sensitivity case, increasing h from 650 to 2000 W m−2 K−1 lowers the modeled maximum temperature from 132.1 to 99.6 °C without eliminating the central hotspot. The chip-side and cold-side cross-model differences are 1.28–2.98% and 9.54–12.56%, respectively, when terminal boundaries differ, while temperature-dependent loss raises the lumped Cauer peak by approximately 11 K. Mesh, time-step, and energy checks verify the numerical implementation, and cross-model comparisons assess consistency.
This study aims to investigate the coupled mechanical, thermal and carrier transport behavior of a damaged semiconductor half-space with double porosity. The objective is to examine the combined influence of nonlocal elasticity, thermal memory, damage evolution and porosity on the field distributions under generali...
Pooja Nagpal, S. M. Hussain, I. Alraddadi et al.· International Journal of Num...· 0 citations
Liquid-cooled mini-channel heat sinks can remove heat from compact electronic footprints, but comparisons among experiments, analytical correlations, and CFD can be distorted when external tubing/header losses are treated as channel losses or when one-sided heating is reduced using an arbitrary heated area. This study...
M. Shehadi, Farid El-Breidi· Inventions· 0 citations
Microchannel heat sinks have emerged as a leading solution for high‐heat‐flux thermal management in electronics, aerospace, energy conversion and biomedical systems owing to their high surface‐to‐volume ratio and superior convective performance. As channel hydraulic diameters decrease to the microscale, however, fluid...
Md Atiqur Rahman, A. Adarsh, Dharani Kurri et al.· Engineering Reports· 0 citations
To address the challenge of achieving a balanced match between internal thermal resistance bottlenecks and enhanced external heat dissipation in high-power-density liquid-cooled IGBT modules, this paper establishes a three-dimensional conjugate heat transfer model comprising the IGBT/FRD chip, the packaging layer, the...
Feng Wang, Meng-Zhen Zhang, Wang Dou et al.· Applied Sciences· 0 citations
A fast transient electrothermal network model is developed for thermoelectric–microchannel (TEC–MC) hybrid hotspot cooling, where full three-dimensional multiphysics simulations are computationally prohibitive under time-varying thermal loads. Based on a previously established steady-state thermal-resistance network, h...
Daniyaer Yasen· Applied and Computational En...· 0 citations
The rapid expansion of artificial intelligence, high‐performance computing, and chiplet‐based electronic platforms is intensifying package‐level thermal bottlenecks by increasing power density and hotspot severity. Polymer‐composite thermal interface materials (TIMs) offer scalable fabrication and cost‐effective manu...
Jin-Gyu Na, Jaeho Seo, Sung-Woo Yang et al.· Advanced Materials & Technol...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.