Sep 2026· Applied and Computational Engineering· Vol 262, pp. 130-138· 0 citations
Abstract
A fast transient electrothermal network model is developed for thermoelectric–microchannel (TEC–MC) hybrid hotspot cooling, where full three-dimensional multiphysics simulations are computationally prohibitive under time-varying thermal loads. Based on a previously established steady-state thermal-resistance network, heat-conduction and convection paths are represented by thermal resistances, while thermal energy storage in the chip, ceramic substrates, electrodes, thermoelectric legs, and microchannel heat sink is represented by thermal capacitances. Chip heat generation, Joule heating, and Peltier heat are introduced as independent or temperature-controlled heat sources. To resolve the temperature gradient within the thermoelectric legs and the time delay associated with the propagation of volumetric Joule heat toward the cold side, the thermoelectric legs are discretized into 20 layers. The model is implemented in MATLAB/Simulink and validated against both three-dimensional COMSOL simulations and experimental measurements. Under heat-load and current pulse conditions, the maximum relative deviations from the three-dimensional simulations are 0.99% and 0.78%, respectively, while the maximum deviation from the experimental results is 1.61%. For a transient sweep comprising 71 operating points, the reduced-order network model requires approximately 4 s, whereas the corresponding three-dimensional simulations require approximately 20 h, yielding a computational speedup of more than three orders of magnitude. The proposed model captures hotspot spreading, thermoelectric coupling, and microchannel heat rejection, and provides an efficient system-level tool for transient analysis and control-oriented design of TEC–MC integrated cooling systems.
This paper presents a finite-element framework to study how device geometry affects the switching current of multilayer heater nano cryotrons (hTrons). The device comprises a 50 nm Au/5 nm Ti heater, a 100 nm SiO2 spacer, a 23.6 nm NbN channel, and a Si substrate. Two-dimensional electrothermal simulations examine nine...
B. Barua, Md Rahatul Islam Udoy, Shamiul Alam et al.· 0 citations
To enhance heat dissipation efficiency and temperature uniformity for on-orbit replaceable space cameras, this study develops a systematic partitioned channel design methodology for liquid cooling plates. Space-borne optoelectronic systems operating in extreme orbital thermal environments face significant challenges du...
Yin-Lin Li, Jun-Jun Qin, Yong-Lin Bai et al.· Engineering Research Express· 0 citations
The thermal performance of jacketed reactors is strongly influenced by the thermophysical properties of the applied heat transfer fluid. While analytical methods provide rapid engineering estimates, they are often unable to describe local flow structures and temperature distributions within the jacket space. In the pre...
A. Varga· Periodica Polytechnica: Mech...· 0 citations
We use cookies to run the site and, with your consent, for analytics and to show ads.
See our Cookie Policy.